Two-lug nutplate with bracket-retained nut element for FOD-critical applications where nut replaceability is desired but nut element retainer clips are not permitted. Supplied with integral elastic installation fixture. Fixture simplifies nutplate installation by providing bondline clamp-up and maintenance of concentricity with the fastener hole, ensuring full availability of nut float and protection of threads from adhesive.

Instead of relying on limited data center infrastructure or building from the ground up, AWS Modular Data Center delivers a cost-effective, self-contained modular data center solution that supports customers’ data center scale workloads. With this offering, defense customers can securely store, analyze, and interpret petabytes worth of data in real-time to gain military advantage in the most isolated environments.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Highest Productivity with reliable part quality • Maximize productivity by using up to 4 lasers, advanced scanning strategies and bidirectional recoating. • Maintain reliable part quality by using uniform gas flow and precise 3-axis scanner motions. • All features are designed with minimizing the cost per part in mind to maximize your profitability. Automation of processes and minimize job to job time. • For increased operational efficiency, powder handling, powder sieving are optimized. • The job to job time is minimized by using exchangeable build containers. Best in class volume • Offering uninterrupted 24/7 series production utilizing the segment‘s largest build volume and sophisticated powder management. • This allows for printing of a wide range of mid to large size fully functional components. Easy to Print with a wide range of materials • DLX enables the production of highly precise and high-quality printed parts with a wide range of materials. • Standard materials are Aluminium, Titanium, Copper, Inconel, Maraging Steel, Stainless Steel and more.

This system processes threat information across air, surface, and underwater domains, while providing video distribution, recording, and storage functions. It also interfaces with external equipment to enable efficient, fleet-wide operational control. - Compliant with MIL-SPEC standards (shock, vibration, temperature/humidity, EMI/EMC) - Equipped with a liquid-cooling system to protect internal components

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

Features ● Wideband Frequency Range of 2.0~18.0GHz ● Rigid Construction with AL Brazing ● Monotonic Beam Shape, No Beam Split ● Optimized Gain Ripple and VSWR Applications ● General Purpose TX/RX Antenna ● EMC Testing ● TX/RX Antenna for EW Testing ● Wideband TX Antenna for Anechoic Chamber

THETIS-M2 is a multifunction thermal imaging system that provides soldiers with an advanced, light weight solution for day and night reconnaissance, surveillance and forward observation purposes. It also gives the blue forces a real-time target acquisition and target coordinate calculation capabilities. Thermal Camera + Direct View Optic +Laser Range Finder + Digital Magnetic Compass + GPS