Superior Performance: Stable braking power under extreme operating conditions, from taxiing to high-speed landings. Proven Reliability: Robust structures and advanced materials that guarantee long service life with minimal maintenance. Optimized Safety: Redundant design features and compliance with international aviation standards to meet the highest levels of operational safety. Custom Solutions: Tailored brake designs to fit the specific requirements of fixed-wing aircraft, rotary aircraft, and unmanned aerial platforms.

The X-band LNB is a satellite ground transport terminal that includes a transmission rejection filter and performs downconversion of X-band signals to IF using an internal reference frequency. It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as a lock alarm. The unit provides a total gain of over 60 dB and supports a wide bandwidth of 500 MHz. Its frequency stability is maintained within 0.31 ppm.

JWGE connector which was derived from the VG95234, was developed for low-voltage/high-current transmission and, when combined, exhibits IP68 water and dust resistance, also exhibiting excellent durability and mechanical performance in a temperature range of 55° to +125°C. These features are applied and utilized in military vehicles and various industrial equipment.

CI Systems사의 는 구성 가능한 소형 휴대용 미사일 방사 시뮬레이션 플랫폼입니다. MSS는 항공기 이륙 라인에서 정기 검사로 또는 실험실에서 미사일 경보 시스템(MWS)의 준비 상태와 성능을 테스트할 수 있도록 합니다. MSS는 자외선(UV) 또는 적외선(IR) 대역의 소형 방사 소스를 내장하고 있으며, 단일 또는 이중 방사 소스를 지원합니다. 이 소스는 내장된 마이크로프로세서에 의해 모드 조절되어 어떤 미사일이 방출하는 방사라도 현실적인 시뮬레이션을 제공할 수 있습니다. 사용자 친화적인 소프트웨어를 통해 어떤 테스트 프로파일도 MSS에 구성하고 업로드할 수 있습니다. Translated with DeepL.com (free version)CI Systems’ Missile Signal Simulator (MSS) is a configurable compact, hand-held, missile radiation simulation platform. The MSS enables the operator to test the readiness and performance of Missile Warning Systems (MWS) in the flight line as a routine test and in the laboratory. The MSS contains a miniature radiation source in the UV or IR band, with single or dual radiation sources. They are modulated by a built-in microprocessor capable of delivering a realistic simulation of the radiation emitted by any missile. Any testing profile can be configured and uploaded onto the MSS using a user-friendly software.

Tactical Mobile Anti Drone Rifle system offers directional and Omni-directional solutions (selected by the operator) for pilot-controlled or autonomous GNSS-guided (waypoint) drone threats. The field proven ergonomic, modular and light-weight solution of the legacy RF Jammer system is customized for drone threats within this system. The scope on the rifle is used to aim to the threat and neutralize it with directional antenna system. For multiple drone threats or area protection, Omni-directional antenna system is used. Field Proven ergonomic and efficient design Directional and Omni-Directional Jamming Infrastructure RF Jamming Frequencies include; -GNSS Frequencies -Drone Control and Data Links Area Protection (fixed use) -Omni-Directional Antennas for area coverage -Remote Control (option) -Continuous operation from mains (220 Vac or other) (option) Different battery options are available upon request

The static-dynamic mixer vipro-DUOMIX is perfectly suited for compressible, two-component materials – with very different viscosities, extreme mixing ratios and high-pressure sensitivity. The extended version with optimized mixing blocks for low-viscosity, and high-viscosity materials on either side brings a further advantage: It is ideally suited for materials that are difficult to mix – with different or identical viscosities. A modular design with five different dispenser sizes per side allows complete flexibility. And a wide range of mixing ratios from 1:1 to 100:1. The vipro-DUOMIX can be used for complex two-component applications in diverse industries such as automotive manufacturing, aerospace, or electronics. Irrelevant of whether it is for a dot dispensing, a bead application or for a potting application. Particularly in the production of aircrafts the static-dynamic mixer is used for honeycomb potting or for edge sealing. Special nozzles with adjustable bead width are available for this purpose. A wide range of two-component materials based on e.g., polyether, epoxy resin, silicone or polyurethane can be dispensed in all areas of application. Due to the parallel alignment of the dispensers, and due to a weight-optimized design, the vipro-DUOMIX is very compact – ideal for assembly in robotic cells or for automated applications.

This rocket nozzle featuring conformal cooling channels and isogrid ribbing was manufactured using EOS Copper CuCP, a pure copper material optimized for additive manufacturing. The production required approximately 72 hours, taking advantage of the exceptional thermal and electrical conductivity of pure copper to meet demanding aerospace performance requirements. As one of the few companies in Korea capable of performing metal additive manufacturing with pure copper, we provide advanced technical expertise and support OEM production as well as collaborative technology development projects with various industrial partners. The showcased component was designed by nTopology and demonstrates the synergy of advanced design optimization with state-of-the-art copper additive manufacturing.

Seedcore’s VPX Chassis Housing Assembly is designed as a structural platform for Multi-function radar signal processing systems. Featuring a robust 8U 2×5 slot VPX configuration, precision-machined aluminum construction, and excellent thermal management, it ensures high mechanical stability and optimal heat dissipation in demanding defense environments. This chassis housing is deployed in Korea’s key air defense radar systems, including the L-SAM, M-SAM, and LAMD programs, supporting mission-critical radar signal processing architectures.