The low profile MD145MW-DroneCAN is a 10mm, metal gear, sub 1 oz servo with dual ball bearings, cored motor, and contactless magnetic encoder. This discrete package offers high performance and reliability for robotic and remote, unmanned aerial applications where space is at a premium. Operating via DroneCAN (formerly UAVCAN) control at a wide voltage range from 4.8~7.4 volts, the unique MD145MW-DroneCAN servo produces impressive torque and speeds in its class. #UAV #UAS #UGV

The EPL2000 is an all-in-one RU/DU/EPC/application server system that provides seamless outdoor LTE service without network interconnection via backhaul. Portable and deployable in areas inaccessible by vehicles, it is optimized for disaster response and military operations.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Optical encoders for defense and space applications: missile seekers weapon stations radar electro-optics systems space mechanisms (CMG, SADM, APM)

A cost-effective and reliable EO/IR solution designed for unmanned platforms, combining compact design with strong performance. The system integrates QVGA/VGA-class infrared sensors and 2–20 megapixel EO cameras, providing versatile options to meet different operational requirements. o Infrared (IR) Sensor: QVGA/VGA resolution, optimized for detection and recognition in short-to-mid range surveillance o Electro-Optical (EO) Module: 2MP–20MP visible light cameras with high-resolution imaging, adaptable to multiple mission profiles o Design Philosophy: Lightweight, compact, and robust for integration into unmanned aerial vehicles (UAVs), unmanned surface vehicles (USVs), and ground robotics o Key Value: Balances price competitiveness, system reliability, and modular scalability for mass deployment

Delivering dinner to your door. Bringing medical supplies to hospitals. Surveying waters where someone is missing. Drones are starting to help make many tasks faster and life a little easier. One hitch in using drones is that, in most cases, regulators in many countries require that a human keep them in sight at all times.

Hybrid wet tantalum capacitors with unique chemistry and construction making it the most power dense capacitor in the industry. DC Storage Power for: • T/R Modules • Electronic Warfare • Directed Energy • High Power Amplifier • Power Interruption (MIL-STD 704/D0-160) Advanced Capacitors for Demanding Applications • High Power 10V to 125V • Low ESR • >100 Amp Discharge • Hermetic • Unlimited Cycle Life • Unlimited Shelf Life • Low Weight/Volume • High Shock and Vibe • >5 Million Hour MTBF • 55°C to 125° C Operation