33 GHz Mixed Signal Oscilloscope; 4 analog / 16 logic channels

Threaded bushing enables localized reinforcement of and attachment to panel structure. Supplied with disposable installation fixture. 1.25" Flange Diameter. SIZES: Imperial fine thread sizes from 10-32 (.190"-32) to 3/8-24 (.375"-24), Imperial coarse thread sizes from 8-32 (.164"-32) to 3/8-16 (.375"-16), and metric thread sizes from M5 to M8. 1.25" Flange Diameter. Grip lengths from 0.25" to 1.50". MATERIALS: Aluminum, 300 Series Stainless Steel, A-286 Stainless Steel, 316 Stainless Steel, and Titanium. Optional epoxy primer. FEATURES: Standard 1.25" diameter flange, 0.75" x 1.25" trimmed flange optional.

CAPHMICRO has the ability to design and manufacture wire harnesses and cable assemblies for defense, aerospace, and space launch vehicles/satellites. We design and manufacture in compliance with IPC-620 and J-STD-001 standards. Additionally, we have a global supply chain capable of quickly supplying a wide range of materials. We provide comprehensive solutions for wire harnesses, from design through to manufacturing and inspection.

EMCORE’s IPADS-I (International) provides significant enhancements for today’s Army and Marine Corps survey teams. IPADS offers a proven, reliable, lightweight, off-the-shelf solution developed around four main components. > Compact Position/Navigation Unit (CPNU) > Control and Display Unit (CDU) > Battery and Charger Unit (BCU) > Porro Prism Assembly (PPA) All components are housed in a robust frame that allows for easy component access and stability, while facilitating a ready, two-person transfer between vehicles and aircraft. Features High-precision common survey enables efficient mass fires Impervious to jamming (inertial mode) Embedded Selective Availability Anti-Spoofing Module (SAASM) GPS option Navigation aids (compass rose and digital maps) In-vehicle and offset survey Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Artillery Survey to Mark: Survey Control Point (SCP) position; used to initialize weapon systems Orienting Line (OL) position and azimuth; used to initialize and align artillery assets

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The ACTUS® CORE-3 Mini Dot Sight provides rapid target acquisition with unlimited eye relief and a precisely aligned aiming point projected onto a collimated lens. Constructed from a fully sealed 7075-T6 aluminum housing, it offers exceptional durability, enabling reliable performance in even the harshest environments. Its premium lens coating ensures superior light transmission and minimal distortion, delivering crystal-clear accuracy across a wide range of conditions.

Integrated Soldier Power / Data Hubs are Personal Area Network (PAN) hub and interconnect systems providing network data access, peripheral connectivity and smart battery power management for dismounted soldier C4ISR electronics in Digitally Aided Close Air Support (DACAS) missions, including precision targeting, tactical radio communications, real-time video downlink, night vision technologies, GPS/navigation, blue force tracking, personal computing and smart phone integration.

SURI-A is a compact design thermal sight based on high performance infrared detector meeting military grade requirement. It uses a lightweight un-cooled thermal imager and advanced optic providing soldiers a one-stop solution for reconnaissance, patrol and engagement, regardless of light and battle field conditions. It is a versatile, multipurpose sight that is compatible on a broad range of Fire Arms.