A cost-effective and reliable EO/IR solution designed for unmanned platforms, combining compact design with strong performance. The system integrates QVGA/VGA-class infrared sensors and 2–20 megapixel EO cameras, providing versatile options to meet different operational requirements. o Infrared (IR) Sensor: QVGA/VGA resolution, optimized for detection and recognition in short-to-mid range surveillance o Electro-Optical (EO) Module: 2MP–20MP visible light cameras with high-resolution imaging, adaptable to multiple mission profiles o Design Philosophy: Lightweight, compact, and robust for integration into unmanned aerial vehicles (UAVs), unmanned surface vehicles (USVs), and ground robotics o Key Value: Balances price competitiveness, system reliability, and modular scalability for mass deployment

EO/IR Payload System EOTS (Electro-Optical Tracking System) is an electronic optical image tracking device that identifies danger and emergency situations on the battlefield, monitors and tracks tragets, and calculates their coordinates, and is an essential equipment for drones that can be used in both military and private sectors. M1 and M2 were developed to use a common mount that connects to the drone by keeping the size of the gimbal assembly the same at 4 inches. M1 can be recognized at a maximum of 0.2km for humans during the day and at night, and M2, which operates in adverse conditions at night, can be recognized at up to 1.0km for tanks in the form of IR continuous zoom.

LightIR series key features: • High MTF performance • Extremely compact, light, configurations • Suitable for a wide range of low-SWaP applications • Maintains focus through the entire zoom range • Compatible with major MWIR and LWIR detectors • Designed to withstand harsh environmental conditions

The Nebula connector employs the renowned Hypertac hyperboloid contacts as the bedrock of its high reliability providing immunity to shock and vibration fretting and over 100,000 mating cycles. These features combine with current carrying capacity up to 1.5 Amps per contact and low insertion / extraction forces to provide significantly enhanced quality and reliability performance compared with other more commodity connector solutions. Available for direct mounting to PCB, the Nebula Series supports independent function for all its 22 contacts. It also offers optional quarter-turn locking hardware for faster connector securing and to prevent unintentional separation.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

- 1 axis Fiber Optic Gyroscopes - Bias Repeatability: 0.1°/hr - Bias Stability: 0.02 °/h (1,000 sec) - Angle Random Walk: 0.005 °/√hr - Scale Factor Accuracy: 500 ppm - Operating Voltage: 5 V (1 A) - Interface: RS422 Weight: 1.0 kg EMC: MIL-STD-461E

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.

To date, we have experience producing more than 10,000 pieces and have the ability to produce an average of 500 molds per year.