R&S®M3SR은 민간, 방위, 해상 지-공-지 통신 솔루션을 위한 최신 고정식 무전기를 대표하는 기기입니다. 로데슈바르즈는 점차 엄격해지는 통신 요구사항에 대해 수년 간의 실무 경험을 기반으로 한 기술 개념으로 대응하고 있습니다. 무전기는 가장 엄격한 품질 측면을 충족하여 최대 RF 성능을 제공합니다. 이 고성능 소프트웨어 정의 무전기는 전 세계 보안 당국과 정부 조직에서 높은 평가를 받고 있습니다.

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

ORSKOREA’s thread grinding machines are designed for high-precision machining of both internal and external threads, covering a wide range of thread profiles and dimensions. These machines are critical for producing aerospace fasteners, defense system parts, precision ball screws, and other components where accuracy and durability are vital. Key Advantages • CNC Control: 4-axis (SGTE) and 5-axis (SGTI) for complex thread profiles • High-rigidity structure minimizing vibration and thermal distortion • Built-in dressing and balancing units for consistent quality By shortening processes and improving efficiency, ORSKOREA’s thread grinders reduce costs while enabling high-value, high-accuracy production. They also serve as advanced domestic alternatives to imported machines, strengthening localization and export competitiveness.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

Effective bird control is prominent for mitigating potential Bird Strike risks at civil airports, airbases and wind farms. Our field proven bird control equipments developed through years of research contribute to safety and protection of valuable assets.

Additive manufacturing: - enables custom electronics cooling solutions, providing precise heat management, compact designs, and improved reliability for high-density electronic components. - battery coolers offer optimized thermal management, extending battery life, enhancing energy efficiency, and ensuring compact integration in electric vehicle systems. - allows for tailored cooling solutions for electric motors, improving heat dissipation, enhancing performance, and reducing system weight for efficient operation.

The Fibre Channel D-sub connector series features a multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is extremely low contact resistance when measured from the contact outer body to the connector flange. The Fibre Channel D-Sub series also delivers superior performance ensuring minimal RF noise and high durability up to 1,000 mating cycles, while meeting and surpassing all requirements of MIL-STD-202 for shock and vibration. Offered with 150 Ohm quadrax contacts, the connectors are available with 2, 4, 6 or 8 way insert arrangements. Additionally, D-Sub connectors feature ease of assembly, and a robust and comprehensive training package. To ensure that the correct high speed connectors are mated to address specific wiring requirements and keying functions, a keyed jack post option has been incorporated into the design. The six-positioned post allows for 36 possible keying combinations assuring that the correct Fibre Channel D-Sub plug is mated to the correct high speed receptacle. Non-keyed jack post versions are available as well. Fibre Channel D-Sub connectors feature size 3 quadrax contacts which are 30% larger than the size 9 configuration utilized in the 100 Ohm quadrax, ensuring a matched impedance signal throughout the contact mated pair at 150 Ohm differential impedance. These features ensure that Smiths Interconnect's Fibre Channel D-Sub connectors deliver the critical edge customers require.