ELECTROMECHANICAL RELAYS

The Fuel Heater is engine-mounted with fluid connections to both the engine fuel supply system and the engine lube oil system. The heater provides fuel heating for fuel de-icing, using engine lube oil flow during aircraft cold start and cold operation periods. REPAIR PROGRAM • Triumph has the expertise only the OEM can offer • OEM repairs are more dependable, increase MTBF and cost less long-term • Repair price is all inclusive • TAT 45 days approx

Engineering Design Assistance Material Research & Development Manufacturing

Powered by NVIDIA® Jetson AGX Orin™ SoM bundled with JetPack 5.1.1 Powered by NVIDIA® Jetson AGX Orin™ Industrial bundled with JetPack 6.0 Rugged -25°C to 70°C fanless operation (JAO32/ JAO64) - No throttling at 55°C with JAO64 MAXN Mode Rugged -40°C to 75°C fanless operation (JAOi) - No throttling at 50°C with JAOi MAXN Mode IP66 waterproof and dustproof Support 8x GMSL2 automotive cameras via FAKRA Z connectors (NRU-230V-AWP) 4x PoE+ GbE and 1x 10GBASE-T via M12 X-coded connectors 2x isolated CAN 2.0, 1x RS232, and 1x isolated RS485 via M12 A-coded connectors 1x system monitoring port by automotive-grade MCU 8V to 48V wide-range DC input with built-in ignition power control Compatible GMSL2 cameras with pre-built drivers

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

The UHF-band TRX module features transmit diversity, allowing selection between two transmit ports and providing an output power of at least 1 W. It includes a gain control function for transmission and an internal local oscillator for IF-to-UHF upconversion. Transmit functions also include ALC (Automatic Level Control) and over-temperature protection. On the receive side, the module selects one of two input channels and performs downconversion. It supports AGC (Automatic Gain Control) with a response time of 80 µs, enabling real-time gain adjustment based on input signal level. The dynamic range of the receive input spans from -100 dBm to -20 dBm, and the noise figure is 5.0 dB or less. Both transmit and receive paths include built-in path self-test functions.

The SCXMC-AURORA is one of Seedcore’s flagship products, designed for high-speed optical data communication through an XMC interface. Utilizing the Xilinx Aurora 64B/66B protocol, it supports four transmit/receive channels, each operating at 10.3125 Gbps via integrated optical transceivers. A device driver program is required for operation, and the Linux driver can be downloaded from the product information page on Seedcore’s website. This module is deployed in the M-SAM air defense system, providing reliable and high-speed data transfer between mission-critical embedded components.

The vast range of ABC products allows us to meet the greatt majority of customer requests. Many products exist in our catalog and can be declined either through AMM or CMM, or through aircraft, or through more universal functions. Thus we propose test means associated with capabilities (universal benches) or associated with particular components (CMM) ...