TESCAN SOLARIS X 2 extends FIB physical failure analysis capabilities to large-area applications, making deep cross-sectioning of advanced packaging devices, displays, MEMS, and optoelectronic devices more efficient. Featuring the new generation Mistral™ Xe Plasma FIB column, SOLARIS X 2 offers increased maximum ion beam current and a sharper ion beam profile across the full range, with significantly reduced beam tails. This allows operators to use higher milling and polishing currents, achieving superior surface quality comparable to conventional Plasma FIB, but with greater speed and precision.

Device for checking turret operation, turret fan control, air conditioning control, and status.

- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

Additive manufacturing: - enables custom electronics cooling solutions, providing precise heat management, compact designs, and improved reliability for high-density electronic components. - battery coolers offer optimized thermal management, extending battery life, enhancing energy efficiency, and ensuring compact integration in electric vehicle systems. - allows for tailored cooling solutions for electric motors, improving heat dissipation, enhancing performance, and reducing system weight for efficient operation.

It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

The Defence Technological and Industrial Bases is indispensable for maintaining peace and security. After all, it provides an armed force with services and equipment. If it does not, the armed forces are left hobbled. This also applies to the Dutch armed forces. Nevertheless, the defence and security sector is experiencing difficulties in accessing private finance. Referring to Environmental, Social and Governance (ESG) criteria, companies in the sector would not be able to access private financing from pension institutions, insurers and financial service providers. Because of the same criteria, the sector is experiencing difficulties in opening accounts with private banks. Below is summary on the current state of the issue.

A REDCOM SVG system consists of one or more REDCOM Sigma® SVG-1200 units and a series of standard production General Dynamics Sectéra vIPer phones. Each REDCOM SVG-1200 can interface with up to 12 vIPer phones, which act as voice encryptors for TDM or VoIP voice networks. The encryptors allow any line, trunk, or conference port to conduct secure voice communications with any SCIP-capable device. If more than 12 secure talk paths are required, multiple SVG-1200 units may be networked together.

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.