The low profile MD145MW-DroneCAN is a 10mm, metal gear, sub 1 oz servo with dual ball bearings, cored motor, and contactless magnetic encoder. This discrete package offers high performance and reliability for robotic and remote, unmanned aerial applications where space is at a premium. Operating via DroneCAN (formerly UAVCAN) control at a wide voltage range from 4.8~7.4 volts, the unique MD145MW-DroneCAN servo produces impressive torque and speeds in its class. #UAV #UAS #UGV

The ACTUS® CORE-2 Dot Sight is a high-performance optical device chosen as the Warrior Platform Selection Equipment by the Republic of Korea Army (ROKA). Built to MIL-SPEC standards, it is a further development of our ACTUS® CORE-1 Dot Sight. Housed in a smaller form factor, the ACTUS® CORE-2 meets rigorous military requirements, including extreme temperature resistance, shock testing, waterproofing, and protection against fluid contamination. Designed for durability and reliability, the CORE-2 enhances operator safety in the field, ensuring quick and precise target acquisition during critical missions.

The Crane stands as a state-of-the-art Mid-Wave Infrared (MWIR) detector. This device features a 5-megapixel resolution in a 2560×2048 format with a fine 5μm pitch. It is based on SCD's established XBn technology or Hot Full Midwave (HFM) and incorporates a digital readout circuit developed using an advanced CMOS process. The High Operating Temperature (HOT) Focal Plane Array (FPA) functions efficiently at 150K or 120K, enabling a large-format detector that excels in image quality while maintaining a relatively compact size, weight, and power consumption. SCD continues to lead in innovation.

- Provides accurate measurements of the trajectories of aircraft, guided weapons, separation of aircraft, and target encounters. - Using CW and FMCW

It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

A ground control system that establishes unmanned aerial vehicle missions, controls aircraft and mission equipment, reads image information, and transmits it to higher-level units.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.

Key Features - Frequency Range: 8.5 - 10GHz - RX Noise Figure: 3.0dB - RX Small Signal Gain: 21 dB - TX Small Signal Gain: 27dB - TX High Pout: 39dBm - TX High PAE: 37% Chip size: 2.9x2.5x0.1mm