The SC-SBCRTM-V2 is a Rear Transition Module (RTM) designed to extend the I/O functionality of the SBC6511 single-board computer. Mounted on the rear side of the main VPX backplane, this module provides additional I/O expansion through Micro-D and D-sub connectors for synchronization signals, two Ethernet ports, two Mini-DisplayPort video outputs, two USB interfaces, and MMCX connectors. It enhances system flexibility and connectivity for embedded and radar signal-processing applications.

Features ▪ Xilinx Zynq-7000 Series ARM-Cortex-A9 Core ▪ 10/100/1000 Ethernet Interface ▪ General-Purpose Input/Output ▪ SDLC Interface ▪ RS-232 Interface ▪ VPX 3U Form Factor ▪ Wedge lock, Plug-in Design ▪ Customized Rear I/O Pin Map

Identification Friend or Foe is an identification system designed for command and control. It enables military and civilian air traffic control interrogation systems to identify aircraft, vehicles or forces as friendly, and to determine their bearing and range from the interrogator. Raytheon Intelligence & Space has more than 80 years of experience in IFF.

SURI-III is a super multi functioning sight, optimizing firing capabilities for Caliber 50(M2) and AGL(MK19)in the day and night time condition. It could be supported by HMD for User’s shooting position in convenience and for saving Force’s lives. Thermal Camera + Day Camera + LRF + Red Dot Sight + Wireless Goggle + Customized Reticle + Wide Screen presents in One Device

< Frequency Range > ● 500 ~ 2700 MHz < Output Power (W) > ● 100 < Gain (db) > ● 50 < Power Supply (V) > ● 32.5 < Current (A) > ● 14 < Dimension > ● 208.3 x 91.4 x 26.9 (mm)

High impedance D-Sub connectors are designed to ground the outer shield of a twinax or quadrax contact directly to the shell of the connector. A multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is an extremely low contact resistance when measured from the contact outer body to the connector flange, ensuring minimal RF noise and high durability of over 500 mating cycles.

Magnetic sensors (Hall effect) for air and land applications fly by wire

The Haigh-Farr family of rugged Blade antennas is available in frequencies ranging from UHF to upper C-band. Since 1972, our blade antennas have a demonstrated reliability of use in high-performance airborne applications. In addition, they are used extensively in ground-based vehicles such as race cars, trucks, tanks, and motorcycles, to name a few. 60XX & 61XX Series: Our 60XX & 61XX Series blade antennas have quasi-uniform null-free hemispherical gain patterns and may be provided in either straight or rounded blade configurations. 60XX and 61XX Series blade antennas are available in standard and high powered versions. With sufficient airflow, our standard blades handle an average power of 25 - 30W CW and our High Powered blades can handle an average power of 80W CW. These blade antennas share a common footprint with varying height. Multiband: Haigh-Farr Multiband blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas with additional bandwidth. UHF: Haigh-Farr UHF blade antennas provide coverage down to 380 MHz and up to 470 MHz in two unique form factors. Our 6300-X series of blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas in the larger blade structure required at UHF-band. Our P/N’s 16230-XXX and 16400-XXX are low profile, mechanically robust designs that can be custom tuned to meet discrete UHF frequencies, with an option to add thermal protection for high temperature environments.