NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars

METRAVIB PEARL is a miniaturized acoustic gunshot detection system initially designed for infantry and dismounted soldier who is in direct contact with the enemy. PEARL provides the capability of finding in a few seconds and in a very intuitive way the origin of the shots that are threatening them. The PEARL system can be installed, using a Picatinny rail, on an assault rifle, a sniper rifle, a machine gun or multifunction goggles/sights. An intuitive interface composed of directional LED arrows shows the azimuth and elevation of the threat. Compact and wireless, PEARL is easy and fast to get started with.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

[LEO GNSS-R] Satellite : LEO RF Characteristics : GPS L1/L5, Galileo E1/E5a(option) Accuracy : Position ≤ 10m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : Sync to GPS Time Data < 1us (1PPS Accuracy < 1.5us) TTFF : Cold Start ≤ 20min / Warm Start ≤ 10min Dara Interface : MIL-STD-1553B, RS-422(Data Interface) [GEO GNSS-R] Satellite : GEO RF Characteristics : GPS L1/L2C/L5, Galileo E1 Accuracy : Position :: ≤ 30m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : 2us(RMS)/Sync to GPS Time Data TTFF : Cold Start ≤ 45min / Warm Start ≤ 20min Dara Interface : MIL-STD-1553B EEE Parts : ITAR Free Parts

Lumir is the first Korean company to successfully develop and manufacture this onboard equipment, delivering superior performance and significant cost savings compared to competitors’ products. By integrating non-volatile NAND flash devices into the image data handling unit, storage capacity has been significantly increased, with data retention maintained even when the power is off.The image data handling unit of the satellite is a core device that receives high-speed, large-capacity data output from Earth observation sensors mounted on the satellite—such as SAR or optical cameras—then compresses and stores the data in real time, while also performing encryption and encoding for transmission to ground stations. Lumir has successfully developed and manufactured this satellite-mounted device domestically in Korea for the first time, breaking reliance on imported technologies. This achievement secures Lumir’s competitiveness by delivering superior performance and significant cost savings compared to foreign products.

This rocket nozzle featuring conformal cooling channels and isogrid ribbing was manufactured using EOS Copper CuCP, a pure copper material optimized for additive manufacturing. The production required approximately 72 hours, taking advantage of the exceptional thermal and electrical conductivity of pure copper to meet demanding aerospace performance requirements. As one of the few companies in Korea capable of performing metal additive manufacturing with pure copper, we provide advanced technical expertise and support OEM production as well as collaborative technology development projects with various industrial partners. The showcased component was designed by nTopology and demonstrates the synergy of advanced design optimization with state-of-the-art copper additive manufacturing.

Based on the T-50 trainer’s superior performance and an armament storing capability, the FA-50 aircraft is further developed and upgraded with Tactical Data Link, Precision Guided Munitions, and Self Protection subsystem. Featuring a fighter jet-class flight performance, the FA-50 aircraft has been deployed and operated in the Republic of Korea Air Force (ROKAF) since 2013.

The HPC2812 is a rugged 6U VPX high-performance computer aligned with the compute-intensive SOSA profile, delivering top-tier processing with dual Intel® Xeon® D-2700 (Ice Lake-D) processors and flexible expansion capabilities. • Supports up to 128 GB DDR4 SDRAM with ECC and 480 GB NAND Flash (NVMe SSD) per node • Offers 2× 100 GbE (or 4× 40 GbE) data plane with RDMA, PCIe Gen 4 expansion plane, plus control and management plane support • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security