MKS Ophir's proprietary dome coatings offer superior uniformity, ensuring excellent image quality from any angle. In high numerical aperture systems like IR guided missiles, precise coating control is essential to meet operational demands and achieve accurate target acquisition. Our unique rotating coating system guarantees thickness uniformity, enhancing image quality and durability. Trust us for customized IR components with unmatched manufacturing expertise, including convex or concave spherical, aspherical, and diffractive surfaces.

PILAR vehicle version is designed for the protection of heavy and light armoured vehicles, as well as police armoured vehicles. It is available as a tetrahedral acoustic array mounted on the vehicle roof. It can also include a display indicating the shot origin and identification. This system has been fitted on several hundred vehicles of the French Army and users on various theatres of operations (Afghanistan, Central African Republic, etc.) have been very satisfied.

This plays an important role that connects EMI shielding pieces of connectors and cables when manufacturing EMI shielded cables. It is also applied and used in defense, space, aviation, and industrial equipment. Key features of the military connector adapter: Designed to be compatible with various MS/VG standard connectors and general connectors. Environmental Protection: It is waterproof and dustproof, ensuring stable operation in severe weather and extreme environments. Robustness: It is highly durable against impact, vibration, corrosion, and more to meet military and industrial requirements. EMI shield: Prevent electromagnetic interference (EMI) to maintain signal integrity.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Haigh-Farr has been serving the United States Department of Defense and associated defense contractors for the last 50 years with pride. In fact, the first antenna design ever developed by Haigh-Farr was engineered for a tactical weapon meant to protect the lives of American war fighters; and a variant of that antenna is still being delivered and deployed to this day.

A gimbal housing is a component that stabilizes and rotates the seeker of a guided weapon. It helps ensure the seeker can accurately aim at the target at all times, regardless of the guided weapon's movement.