To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

1. Maintenance • Depot Maintenance • Structure & Avionics Replacement, Repair, Wire Harness, Test and Inspection 2. Upgrade & Modification • Structure Upgrade and Modification • Avionics Upgrade, System Integration, Test and Inspection Highlights √ Final Assembly incl. Engine Installation √ System Integration, Test & Inspection Project Highlight : KT-100 & Light Sport Aircraft (Final Assembly), HH-60, CH-53, CH-47, F-16, P3-c, C-130H, AS-1S, MD500, NG RQ-4B ( Logistic & Ground Support)

High reliability KA series MIL-DTL-55302 compliant connectors offer signal contacts designed for demanding defense, commercial aerospace and space applications. The 2 and 3 row series are compliant to MIL-DTL-55302 and offer flexibility not available with other interconnects. The 4 and 5 row versions are also available and offer up to 490 contacts.

Key Features - Frequency Range: 8.5 - 10GHz - RX Noise Figure: 3.0dB - RX Small Signal Gain: 21 dB - TX Small Signal Gain: 27dB - TX High Pout: 39dBm - TX High PAE: 37% Chip size: 2.9x2.5x0.1mm  

Inverter platform developed by entirely by Drive System Design with a focus on versatility and flexibility, resulting in a powerful and highly versatile hardware and electronics base platform, which can operate: - From 200 to 800V and beyond, - At a Continuous Output of 450A rms - Delivering an output Power up to 300kW and - A PWM frequency from 20 to 30kHz

Optimized and qualified for next generation Electronic Control Units the Intercompact Series is an innovative solution for PCB to PCB and floating mouting rack and panel applications currently offered in both signal and Ethernet versions. Designed to meet the requirements of the rail and industrial environments, it is also suitable for other demanding markets such as defence, space and test & measurement.

Manpack RF Jammer Systems provide protection to personnel against remote-controlled explosives. These systems create a protective shield through RF broadcasting and neutralize threats activated by radio, wireless telephones and wireless remote-controlled devices. Backpack-type RF Jammer Systems can be carried easily on the back and with the push-pull apparatus. Continuous broadband operation Programmable Structure Self-test capability DDS technology Control from hand terminal Module selection Malfunction warning VSWR warning Personnel protection through RF-proof textiles

JEFF WRAITH I is the tactical goggle for Military & Law Enforcement. The lightweight goggles give you wide protective coverage with a comfortable fit for use. It is compliant with ANSI Z87.1 standard requirement, European CE standard, and exceed U.S. Military eyewear ballistic resistance requirement MIL-PRF 32432A, MIL-DTL-43511D. The Anti-Scratch & Anti-Fog coated polycarbonate lenses give you up to 99.9 protections form UV rays and you can wear the goggle with your glasses on.