Engine Start Begins with ATS. The Air Turbine Starter (ATS) is a key component of an aircraft's secondary power system, driven by Bleed Air supplied from the Auxiliary Power Unit (APU) to accelerate the engine up to approximately 8,900 RPM, enabling engine start. Through the in-house development and localization of the ATS, we have incorporated power generation, optimal design of the shear section with consideration of failure, Containment functionality, as well as lubrication and power transmission systems. In addition, we have secured manufacturing and assembly technologies and continue development aimed at successful operation and the establishment of a mass production system.

Highest Productivity with reliable part quality • Maximize productivity by using up to 4 lasers, advanced scanning strategies and bidirectional recoating. • Maintain reliable part quality by using uniform gas flow and precise 3-axis scanner motions. • All features are designed with minimizing the cost per part in mind to maximize your profitability. Automation of processes and minimize job to job time. • For increased operational efficiency, powder handling, powder sieving are optimized. • The job to job time is minimized by using exchangeable build containers. Best in class volume • Offering uninterrupted 24/7 series production utilizing the segment‘s largest build volume and sophisticated powder management. • This allows for printing of a wide range of mid to large size fully functional components. Easy to Print with a wide range of materials • DLX enables the production of highly precise and high-quality printed parts with a wide range of materials. • Standard materials are Aluminium, Titanium, Copper, Inconel, Maraging Steel, Stainless Steel and more.

1. Feature - An equipment combining visible and short-wave infrared (SWIR) cameras, capable of daytime reconnaissance, surveillance, and target acquisition, applicable to various systems. - It can be mounted on and integrated with various types of weapon systems. - With SWIR mode, targets can be monitored, tracked, and acquired even in conditions with haze, fog, or dust.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

New generation hydraulic test stand built with hydraulic purification system keeping aircraft flight safer and reduce significantly aircraft maintenance cost.

Powered by NVIDIA® Jetson AGX Orin™ SoM bundled with JetPack 5.1.1 Powered by NVIDIA® Jetson AGX Orin™ Industrial bundled with JetPack 6.0 Rugged -25°C to 70°C fanless operation (JAO32/ JAO64) - No throttling at 55°C with JAO64 MAXN Mode Rugged -40°C to 75°C fanless operation (JAOi) - No throttling at 50°C with JAOi MAXN Mode IP66 waterproof and dustproof Support 8x GMSL2 automotive cameras via FAKRA Z connectors (NRU-230V-AWP) 4x PoE+ GbE and 1x 10GBASE-T via M12 X-coded connectors 2x isolated CAN 2.0, 1x RS232, and 1x isolated RS485 via M12 A-coded connectors 1x system monitoring port by automotive-grade MCU 8V to 48V wide-range DC input with built-in ignition power control Compatible GMSL2 cameras with pre-built drivers

This product is designed and manufactured specific for customers’ demand and includes the power supply and signal transmission parts of weapon systems in all fields of the Korean army, navy, and air force, as well as for the civilian field. As all parts are localized and assembled into finished products, they are ensured of best performance and reliable quality.

STANAG 4695 & GOSSRA* * GENERIC OPEN SOLDIER SYSTEM REFERENCE ARCHITECTURE compatible with Nett Warrior BREAK-AWAY CONNECTOR