NO MELT, NO DRIP (50/50 NYLON COTTON) Incorporate 4-way stretch Tweave (Waist band, knees, Groin) Universal knee pad pockets Mesh and string rubber tip at the bottom to improve convenience Fit adjustment though the Velcro behind the knee and bottom parts to protect body temperature and support agile activity Front low profile, rear and ventilated cargo Pockets Applied MIL-SPEC threads and YKK zippers Composition Material: NYLON 50% / COTTON 50% Size : Waist 28~36, Leg S, R, L Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Features ● Wideband Frequency Range of 2.0~18.0GHz ● Rigid Construction with AL Brazing ● Monotonic Beam Shape, No Beam Split ● Optimized Gain Ripple and VSWR Applications ● General Purpose TX/RX Antenna ● EMC Testing ● TX/RX Antenna for EW Testing ● Wideband TX Antenna for Anechoic Chamber

The high performance of the aerospace industry, in both technical and economic aspects, is due in part to its control over the supply chain and its quality throughout the value chain (from the buyer to the SME providers). For GIFAS, it is imperative to continue in this way to keep the industry competitive.

POSITAL's incremental encoders feature a simple internal structure and provide precise positioning information, allowing customers to flexibly address any challenges they encounter in the field. POSITAL's absolute encoders are available as single-turn or multi-turn encoders, offering the advantage of selecting the right configuration for your installation environment from a variety of mechanisms and connection configurations. POSITAL's kit encoders, based on Wiegand technology, store positioning information in real time without relying on batteries, providing a smart and economical solution.

Our products serve the clients in military and aerospace industries, who require high performance with strength and ability to perform at extreme temperatures and pressures.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

RAIBO2 is a quadrupedal robotic platform that uses four legs to navigate to designated locations, observe its surroundings. Based on state-of-the-art robotic control technology, deep reinforcement learning enables highly dynamic, robust, and efficient locomotion. Furthermore, the in-house integration of hardware and software facilitates energy and design optimization, while allowing for extensive customization.