Main Features of CLS-30T5 Camera Link Compatibility: Supports all Camera Link types (Area Scan / Line Scan). Video Distribution: 1:5 distribution capability supporting Base, Medium, and Full configurations. Power over Camera Link (PoCL): Performs PoCL Bypass functionality. Pixel Frequency: Supports a pixel frequency range of 20 MHz to 85 MHz. Transmission Quality: Ensures lossless video signal transmission. Power Connector: Equipped with a lockable DC power jack (Molex connector). Interface: Supports MDR-26 type connectors. Control Signal Support: Supports all standard RS-232 communication speeds.

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

Auxiliary generator that can receive separate power without starting the tank

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.

Model DCL120 Dot Sight is designed and developed specifically for use on .50 caliber (12.7mm) Heavy Machine Guns (HMGs) but not limited to the HMG. This distinctive dot sight adapted the world’s first extra wide lens (170 x 70 mm) which provides accurate shooting in jolting armored vehicles, shaking helicopters and rocking patrol boats with head-up and both eyes open. Unique features: icon3Extra wide lens (120x70mm) allows operators to track moving target with both eyes open. icon3Designed specifically for HMG icon3Solid construction for repeatable accuracy icon3Integrated recoil compensator retains prevents loss of sight picture on high recoil weapons icon3Each sight is CNC machined from a solid block of 6061-T6 aircraft aluminum.

Slice6 AIR, Slice6 Air BR 는 극한 시험 환경에서 아날로그 신호를 정밀하게 측정할 수 있도록 설계된 통합 데이터 수집 장비로, 크기, 무게, 전력(SWaP)에 최적화되어 제한된 공간과 질량 조건에서도 효과적으로 운용할 수 있습니다. 각 모듈은 마이크로프로세서, 이더넷 스위치, 신호 조정 회로, 비휘발성 메모리를 포함하고 있습니다. 독립형, 네트워크형, 기존 시스템 통합형 등 다양한 운용 방식에 대응하며, IRIG 포맷 기반 실시간 스트리밍과 이중 저장 기능을 통해 실시간 모니터링과 백업을 동시에 수행할 수 있습니다. Ethernet-based data acquisition unit (DAU) for flight test and ground shock test. SLICE6 AIR, SLICE6 AIR BR is a complete data acquisition unit for measuring analog signals in extreme test environments. Optimized for size, weight, and power (SWaP), SLICE6 AIR is ideal for applications with tight size and mass constraints. Each module features a microprocessor, Ethernet switch, signal conditioning, and non-volatile memory. The versatile SLICE6 AIR can be used standalone, networked for high channel count tests, or integrated into existing Ethernet-based flight test instrumentation. Real-time streaming in IRIG formats and dual store-in-place recording enables both real-time monitoring and redundant back-up of data on a single device.

Shock Tech designs, develops, manufactures and tests shock attenuation and vibration isolation systems for the most demanding environments. Customized solutions are provided with application requirements analyzation. Low Profile & Avionics Mounts are a series of all attitude, mid to high frequency, low profile mounts, used in a variety of applications including airborne avionics, etc. Bushing Mounts are a series of all attitude, low cost mounts, protecting against both vibration and shock, used in a variety of applications including airborne avionics, etc.

With advanced 3D printing, our turbine blades redefine manufacturing—delivering faster development, higher efficiency through superior quality, and innovative design freedom.