The HPC2812 is a rugged 6U VPX high-performance computer aligned with the compute-intensive SOSA profile, delivering top-tier processing with dual Intel® Xeon® D-2700 (Ice Lake-D) processors and flexible expansion capabilities. • Supports up to 128 GB DDR4 SDRAM with ECC and 480 GB NAND Flash (NVMe SSD) per node • Offers 2× 100 GbE (or 4× 40 GbE) data plane with RDMA, PCIe Gen 4 expansion plane, plus control and management plane support • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security

High reliability KA series MIL-DTL-55302 compliant connectors offer signal contacts designed for demanding defense, commercial aerospace and space applications. The 2 and 3 row series are compliant to MIL-DTL-55302 and offer flexibility not available with other interconnects. The 4 and 5 row versions are also available and offer up to 490 contacts.

Toxic gases, such as Silane (SiH4), Nitrogen Trifluoride (NF3), Sulphur Hexafluoride (SF6), Ammonia (NH3), Nitrous Oxide (N2O), etc. must be contained in IMDG certified MEGC tubes for ocean transportation. For high purity gases such as SiH₄, and NF₃, DS Aether CT provides internal-polished tubes to a grade of 3S, 25S, etc. depending on customer's requirements. DS Aether CT’s tubes keep moisture levels below 1 ppm or 3 ppm by a heated vacuuming process so that gas quality can be maintained at high purity level.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Patrol Killer Guided Electro Optic Target System

The ECL4000 is an LTE outdoor base station developed for the U.S. CBRS market, providing a service radius of several kilometers and enabling seamless private LTE network service.

The EPNR1000 is a drone-mounted 5G base station integrating CU-DU-RU, with 5G Core and an IP-PTT application server built in. All 5G network elements are combined into a single unit, allowing standalone operation (IOPS). Mounted on a drone, it can provide line-of-sight coverage over obstacles like buildings or mountains, making it an ideal system for delivering 5G services over wide areas during disasters or military operations.

Giraffe 1X is an ideal air surveillance component in the Ground Based Air Defence (GBAD) domain that provides ground based air defence commanders with engagement quality target data, drone detection and Counter-Artillery, Rocket and Mortar (C-RAM) sense and warn within a single solution. It is the ideal main sensor for a Very Short Range Radar (VSHORAD) system and can be used as a gap filler that complements larger GBAD systems, or as a Counter-UAS (C-UAS) solution.