[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

The personal pocket-sized ISR capability allows imediate situational awareness for soldiers executing dismounted operations globally. The system provides real-time live motion video back to the operator and the opportunity to take snapshots during missions.

Drone Hunter XD is a handheld anti-drone solution that can quickly detect, identify, and track drones, providing swift onsite responses to drone threats within a 360-degree range of over 2km. Drone Hunter XD effectively neutralizes the frequencies of either a single drone or multiple drones approaching the blind spots of a fixed-type jammer, due to its receiving real-time access to information on detected DJI Drones, including S/N, model number, frequency band, azimuth/altitude angle, speed, and location.

Technology research that needs to be developed/secured to efficiently train future combat pilots ETS must have the ability to provide a realistic training environment in which pilots can immerse themselves in training through the use of simulations and CGFs within a real platform. The advantage of ETS is that it provides trainees with a training experience that is close to the real thing and reduces overall system operating costs by replacing real systems and consumables with simulations. Developed countries are already continuing to attempt to apply various core technologies to increase the efficiency of ETS. Hangil C&C Co., Ltd. is the only ETS development company in Korea, and is striving to develop cutting-edge ETS by combining years of research and development experience and its core technologies.

An Angle of Attack (AOA) indicator is a flight instrument that shows a pilot the angle between the aircraft's wing and the oncoming air, providing a crucial safety margin by warning of an approaching aerodynamic stall. Unlike airspeed. A Vertical Speed Indicator (VSI), also known as a Rate of Climb and Descent Indicator (RCDI) is an instrument which indicates the rate of climb or descent of an aircraft. These devices are installed and compatible with F-16 series aircraft and KAI's T-50/FA-50 series aircraft.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30x2 transmits two independent sets of Base, Medium, or Full configuration Camera Link video signals (supporting up to 10 Taps per set) to a PC frame grabber. Each transmission layer can be configured independently .

ㅇKey Features -Provide communication Interface of at least 100Mbps -Ensuring a fixed bandwidth of communication processors and providing a deterministic communication environment by utilizing Virtual Link(VL) and BAG method -Provide SNMP, UDP, TCP, ICMP protocols ㅇQuality and Certification - DO - 178B DAL A - MIL-STD-810G - MIL-STD-461F