This is the UAV launchers capable of launching the fixed-wing UAVs even on mountainous terrain, field, ships without sufficient runways to take off. It is designed to be the most powerful and easy to operate to take off the fixed-wing type UAVs of various specifications(Take-off weight, Take-off speed, and allowable G-force) into the air. It provides an interface that standardizes the shuttle for any type of unmanned aviation vehicle, and is easy to mount and to avoid take-off interference. A specially designed and manufactured hydraulic actuator is used to fully cope with the take-off weight of the aircraft, and a proprietary accumulator to allow a wide range of launch speed control. And multiple pulleys are equipped to ensure acceleration performance.

AIM사의 는 항공 전용 풀 듀플렉스 스위치 이더넷으로 표준 이더넷 네트워크 기능 시험 및 시뮬레이션, 모니터링 분석용 기능을 제공합니다.

Missions is the only commercially available analysis tool which brings together aircraft definition, aircraft performance and cost investigations in a single environment and delivers reliable projections of key metrics such as payload capacity, maximum range and direct operating cost. Excellent runtime performance and the integrated analysis environment ensure fast results even when dealing with large route networks.

The AI Inspection Rover is capable of autonomous driving indoors and outdoors, obstacle avoidance, high-resolution image acquisition, aircraft underbody inspection, and platooning. Its low-height design allows it to pass under the aircraft, and with its zero-turn function, it can execute missions more efficiently. Additionally, it can drive slopes of up to 10° and overcome bumps of up to 30mm.

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

The EPNR1000 is a drone-mounted 5G base station integrating CU-DU-RU, with 5G Core and an IP-PTT application server built in. All 5G network elements are combined into a single unit, allowing standalone operation (IOPS). Mounted on a drone, it can provide line-of-sight coverage over obstacles like buildings or mountains, making it an ideal system for delivering 5G services over wide areas during disasters or military operations.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.