High-Density Space-grade NAND Flash memory : 1. Density : 128Gbit (2G x 8bit x 8chips) NAND Flash 2. Package Type : 54 Pin SOP (Small Outline Package) 3. Radiation : TID > 60 krad, SEL (TBD)

- A white light mounted on the rear side of the aircraft to indicate the aircraft's location - These lights indicate the aircraft's position, flight direction, and attitude - Visible/IR Mode, Steady/Flash Mode - Light Intensity : FAA FAR 29.1391 ~ 29.1395 - SAE ARP 5825A

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

B Series incorporates the highly reliability Hypertac® hyperboloid contact which provides optimum performance in harsh conditions such as extreme mechanical shock and high mating cycles.

We have been designing and supplying cryogenic turbines for helium liquefaction since the late 1980s. Today we are a major supplier of turboexpanders, compressors and pumps to the world's leading manufacturers of cryogenic systems. Our cryogenic product line utilizes the unique PBS technology and know-how of dynamic gas bearings. We supply to prestigious research institutes such as CERN, Max Planck Institute or Rosendorf Research Centre. With the new HEXT/CTE300 turboexpander we will be ready for the hydrogen ecosystem

EO/IR Payload System EOTS (Electro-Optical Tracking System) is an electronic optical image tracking device that identifies danger and emergency situations on the battlefield, monitors and tracks tragets, and calculates their coordinates, and is an essential equipment for drones that can be used in both military and private sectors. M1 and M2 were developed to use a common mount that connects to the drone by keeping the size of the gimbal assembly the same at 4 inches. M1 can be recognized at a maximum of 0.2km for humans during the day and at night, and M2, which operates in adverse conditions at night, can be recognized at up to 1.0km for tanks in the form of IR continuous zoom.

Original compact design and long-term production know-how. System reliability and overall competitiveness.

We manufacture clamps, latches, hinges, fasteners, exit door handles etc.