A connector in military or aerospace applications is a device used to join electrical wires, cables, or circuits securely, ensuring reliable signal and power transmission under harsh conditions.

Signaty X IR Helmet Strobe is a next‑generation, domestically developed IFF LED device. It features IR plus RGBW color LEDs (red, green, blue, white), all housed under a high‑strength polycarbonate dome. It supports multi‑wireless synchronization via short‑range communication, GPS/RTC, and mesh relay—enabling simultaneous use of RGB LED + IR or RGB LED + white LED, with up to 42 pattern synchronizations (expandable to 252) using 256‑bit encrypted data. Runtime reaches up to 130 hours (LED 130 h / IR 125 h) on a single AA battery. Built to MIL‑STD‑810G and KC standards, it ensures drop, dust, sand, immersion, and temperature resistance. Manufactured in Korea with domestic service support.

KMC Series includes high-density board to board and board to wire interconnect solutions available in multiple configurations from 26 to 162 positions with a 0.5mm contact diameter and is widely used in harsh environments. Space grade/ESA/ESCC qualified are also available.

Depending on the applications of our customers we offer a very wide range of technical solutions of assemblies and / or mechanical subassemblies with various characteristics. ABC offers a wide range of solutions ranging from micro-mechanics to large systems, based on standard solutions already developed and / or customized solutions as needed by the customer.

EMCORE’s SDI170 IMU is designed as a performance-compatible inertial system that is form, fit, and functional with a legacy RLG-based IMU product, but with superior overall performance, versatility, and a significantly higher MTBF (Mean Time Before Failure) rating over ruggedized environments. The tactical performance of the SDI170 IMU is based on EMCORE’s mature, proven, dependable and accurate quartz MEMS inertial sensor technology in our SDI500 tactical-grade IMU. EMCORE’s quartz technology enables repeatable high-volume production of precisely machined sensor structures combined with the inherent large signal output and thermal stability of quartz materials. The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

The V61 camera represents COX’s next-generation un-cooled LWIR imaging technology, built to provide high-performance thermal imaging in a compact and reliable form factor. Utilizing a 12μm pixel pitch sensor with outstanding thermal sensitivity, the V61 delivers precise and sharp thermal images across a wide range of environments. It supports fast auto-focus and versatile zoom lens combinations, making it equally effective for both short-range monitoring and long-distance detection tasks. The camera is designed with real-time multi-format video output, supporting H.265, H.264, and MPEG streaming, ensuring compatibility with modern network systems.
What makes the V61 especially powerful is its adaptability—customers can freely combine the core with different optics to meet unique project needs, whether for industrial inspection, perimeter security, or scientific research. Its wide temperature measurement range and ability to provide reliable data even in demanding conditions establish the V61 as a truly versatile solution. In addition, with COX’s proprietary calibration expertise, the V61 guarantees accuracy and long-term stability, reducing operational risks while maximizing system performance.

< Frequency Range > ● 20 ~ 1000 MHz < Output Power (W) > ● 100 < Gain (db) > ● 50 < Power Supply (V) > ● 32 < Current (A) > ● 10 < Dimension > ● 177.1 x 95 x 30 (mm)