The SCFAN-CTRL-5U is an internal fan control module installed inside the chassis to manage cooling performance. It integrates with FAN trays and operates through Kontron’s Power Supply Control Module (PSCM) to control up to one 12V @ 3.5A fan and seven 12V @ 2.5A fans. This module ensures efficient thermal management and stable system operation in high-performance VPX-based embedded systems. It is deployed in the M-SAM-II multi-function radar system, providing reliable and optimized cooling control for mission-critical environments.

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini D supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Dual Antenna Heading The Certus Mini D provides a high accuracy heading solution using two GNSS antennas. The Certus Mini D rapidly and consistently maintains an accurate heading without the need for magnetic calibration and is unaffected by magnetic interference. Additionally, the system can determine heading while stationary. This makes it well-suited to applications where there is limited, or no, positional movement.

“The Meeting Point” is a private lounge where exhibitors can meet with guests, take a break from the show floor, and connect with industry peers. The Kallman Café serves refreshments throughout the day, offers a place to charge your phone, and provides exclusive WiFi service.

- 1 axis Fiber Optic Gyroscopes - Bias Repeatability: 0.1°/hr - Bias Stability: 0.02 °/h (1,000 sec) - Angle Random Walk: 0.005 °/√hr - Scale Factor Accuracy: 500 ppm - Operating Voltage: 5 V (1 A) - Interface: RS422 Weight: 1.0 kg EMC: MIL-STD-461E

Leveraging industry’s leading MEMS technology to provide previously unheard of capabilities in angle random walk values (0.02°/√hr.) without loss of tactical grade levels across military environments, including 1°/hr. bias stability, the SDI500 is designed to achieve the demanding performance levels required in sophisticated systems applications. It is particularly suited for use by Integrators and OEMs, packaged in a highly miniaturized, cylindrical configuration with a volume of only 19 cubic inches. Boasting a 20-Year lifetime capability without requiring calibration and a MTBF of more than 100,000 hours, multiple output data formats and SDLC, RS232 and UART output interfaces are provided in this revolutionary IMU for optimized systems protocols.

Slightly smaller than the DCL120, the Model DCL110 red dot sight is designed and developed for the mid-size machine guns including armored vehicles, tanks and helicopters. Its wide lens (85x55mm) allows operators to have fast target acquisition and transition with both eyes open and make them easier to track moving targets from a natural firing position. Ballistic drop compensation ensures the red dot reticle is always on the target for the first round accuracy. Unique Features icon3Integrated recoil compensator retains sight picture on fast moving targets icon3Adapted a wide lens (85x55mm) makes easier to track moving targets. icon3Suitable for platform mounted weapons on armored vehicles, helicopters and boats icon3Compatible with night vision device icon3Different trajectory compensator per NATO 12.7 mm, NATO 7.62 mm and Cannon NATO 20