AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

The GSG-8 GNSS Simulator is an advanced software-powered turnkey simulator, supporting multi-constellation, multi-frequency, and hundreds of satellite signals. With an incredible 1000 Hz iteration rate, the GSG-8 GPS Simulator is ideal for space trajectories, custom PNT signals, hardware-in-the-loop, and any type of all-in-view satellites simulation. With the GSG-8 Simulator, you can generate RF signals to simulate how your receiver device will react in the real world, under the simulation parameters that you set. Control every aspect of your simulation, including 6 Degrees of Freedom (DoF) receiver trajectories, multi-vehicle simulation, multi-path signals, jamming and spoofing, as well as atmospheric interferences. The GSG-8 is the most popular positioning, navigation, and timing test solution offered through Safran’s GSG family of Skydel-based simulators. It was developed to deliver the highest standard of Global Navigation Satellite System (GNSS) signal testing and sensor simulation performance in an easy to use, upgradable and scalable platform.

ㅇKey Features -Provide communication Interface of at least 100Mbps -Ensuring a fixed bandwidth of communication processors and providing a deterministic communication environment by utilizing Virtual Link(VL) and BAG method -Provide SNMP, UDP, TCP, ICMP protocols ㅇQuality and Certification - DO - 178B DAL A - MIL-STD-810G - MIL-STD-461F

The ACTUS® ARKS11 (1–10X, 24mm FFP) Riflescope is engineered for precision and durability, meeting the demands of professional users across diverse environments. Featuring a First Focal Plane (FFP) optical design, it provides fast and accurate target acquisition at any magnification level. The illuminated reticle ensures clear and reliable aiming, even in low-light conditions such as dawn or dusk. Built for versatility and performance, the ACTUS® ARKS11 is the ultimate optic for users operating in dynamic and challenging environments.

i3system’s line scanning X-ray detector platform, XID-C15DP/XID-C24DC, is a high performance and cost effective solution for dental panoramic, cephalometric applications. i3system’s direct type sensor ensures the most sharp images among the current products in the market. XID series is designed for compact size and easy installation. High DQE(Direct Quant㎛ Efficiency) enables high performance at lower dose of X-ray. Introduction Indirect type X-ray detector uses the scintillator and the photo-diode(CCD or CMOS sensor) for conversion of the X-ray into the light and for taking images espectively. But the light scatters and goes extinct during it passes through the scintillator and reaches to the CCD or CMOS sensor. As a result, it is inevitable to get blurred image. In the mean time, XID C15DP, direct type detector, converts X-rays into electronic signals directly without conversion process of light. Because X-ray is not converted into light, it provides much sharper images than indirect type detector. XID C15DP is designed to compact for easy installation. It provides Gigabit Ethernet port on the detector for easy configuration. Instead of Gigabit Ethernet, camera link or optical interface can be provided according to requirements of users.

Solution Overview The AI-Based Command Decision Support System, "KWM," identifies battlefield targets and recommends optimal weapon system combinations. It supports end-to-end "Sensor-to-Shooter" execution for rapid, accurate, and efficient engagement and command decision-making. Main Features Identifies targets on the battlefield using integrated sensors and data Recommends the most effective attack strategies for both reconnaissance and attack missions Provides command decision support through real-time analysis and visualization Suggests and allocates optimal target formations and strike assets Supports on-site command and control with a user-friendly interface Key Advantages Enables quick, accurate, and efficient engagement of enemy targets Automated recommendation of attack strategies and allocation of strike resources Real-time synchronization between reconnaissance and attack kill webs Direct connection from detection to strike (Sensor-to-Shooter capability) Increases operational efficiency and decision-making accuracy in complex battlefield environments Applied Cases Successfully piloted in the Army Tiger Boost Project in 2024 Used for command decision-making and efficient allocation of attack resources in live military scenarios

High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

Auxiliary generator that can receive separate power without starting the tank