From precise control of various optical components(laser/detector/amplifier) & laser beam alignment(QD/FSM), a data rate of 10G can be achieved over distances of several thousand kilometers.

The FOR-10T/R supports Base configurations (including 10 Taps) and enables long-distance transmission of image signals via optical fiber, along with RS232 control signals and CC1~4 trigger signals. These signals are transmitted to the PC. This product supports transmission distances of up to 2 km, and by replacing the optical module, even longer distances can be achieved.  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base (including 10 Taps) configurations (CC1~4, RS232, 10 Ports (Taps), LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Maximum transmission distance: 2000 m.  Enables lossless transmission.  Supports all external full-duplex RS232 communication speeds on a single port.  Features a locking DC power jack (Molex).  Camera link Connector Type : SDR connector.

FIRSTEC is developing primary components such as avionics & environmental control devices for KF-21, T-50, KUH, and LAH/LCH.

Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation XFrame® Dynamic Load Carrige® compatible Compatible with our entire accessories line Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for Assaulter's Zip-On Back Panels QASM buckle system Holds up to five 5.56mm magazines Internal plate pocket retention straps accommodate several different plate thickness Soft armor included Composition Material: 500D Cordura® + ARAMID/PV® Size : Small / Medium : 8.5" x 11.5” -9.3" x 12.3" Plate Pocket Front Panel Area of Coverage : Length 13.25” Width 11" Large / XLarge : 10" x 13"- 10.9" x 13.8” Plate Pocket Front Panel Area of Coverage : Length 15" Width 12" Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

STX Engine produces medium speed engine driven power generation equipment that can satisfy customers 100% by ideally combining medium speed engines, which have been collectively produced at our Changwon factory since obtaining licenses from the mid 1970's from MAN ENERGY SOLUTIONS in Germany and NIIGATA POWER SYSTEM in Japan, with a power generation system designed with rich experience in the area of system engineering. By installing diesel engine power generation equipment in locations across Korea and overseas, such as on islands, remote areas, resorts, etc., where no public power supply is available, as well as industrial complexes and hospitals which require good source of power, and factories receiving expensive public power supply, etc., our customers can confirm the investment effect within a short period of time after experiencing the power supply we make available to them, as well as low installation and operation costs and maximized availability of the equipment.

The member companies of GIFAS employ 195,000 people in their aerospace activities in France. These figures do not include temporary workers or the total number of suppliers and subcontractors; this field is estimated to be responsible for 350,000 jobs in France. Our sector is constantly in demand.

SCD’s advanced 12μm VOx Microbolometer stands out as the ideal choice for VGA LWIR systems. With its exceptional image quality, remarkably low Noise Equivalent Temperature Difference (NETD), very low time thermal constant (Tau), rapid image acquisition, and minimal weight, SCD’s Microbolometer ranks among the leading LWIR sensors in the market. It is suitable for a wide range of applications, specifically tailored to meet challenges associated with Size, Weight, Power (SWaP) constraints and highly dynamic applications. This product continues SCD’s long heritage uncooled detectors technology, along with our 25μm and 17μm pitch families, fielded and combat proven for more than 20 years.