• Threaded, bayonet or push-pull coupling connectors • Mil spec series • Coaxial connectors • Power connectors • F/O & data connectors

Our products include latches, hinges, keepers and hold open rods.

Main Characteristics Excellent broadband characteristics Radiation patterns virtually independent of frequency Only one antenna required to cover a wide frequency range Selectable polarization plane Sturdy construction Suitable for mobile use Main Use Optimized for radiomonitoring and measurements Design Owing to its broadband characteristics and the virtually frequency-independent radiation patterns, the SLP – 200M-001G covers a very wide frequency range The sturdy construction makes the antenna Suitable for stationary and mobile applications

The focus on buy-to-fly ratios highlights the contributing role that near net shape processing can offer. This has undoubtedly been a driver in increasing this service offering from AMA. As a major contributor in the aircraft manufacturing supply chain, this is a key area of development for AMA and its companies. Customers are increasingly looking to optimise their production processes. This is primarily driven by the need to maximise their own spindle time for core business activities, with AMA therefore undertaking some of the machining processes. It can take many forms, from simple cutting to more intricate processing in which near net shape pieces are supplied. Even in AMA businesses whose business is predominantly transactional (so called ‘spot business’) rather than contractual, the processing element is increasing. Pre-machined kits of parts to individual specifications are becoming more commonplace. In addition to freeing up time for customers and OEMs to focus on more profitable final processing, near net shape processes can improve product quality, reduce variability and enhance component design functionality. As the industry continues to search for ways to lower buy-to-fly ratios and reduce the amount of waste, near net shape processing will have a greater role to play.

The Ophir® SupIR 80-1200mm MWIR f/5.5 and SupIR 60-1200mm MWIR f/4 lenses are designed for 15 µm 640x512 and SXGA 10 µm pitch FPA (focal plan arrays) cooled MWIR detectors, respectively, providing detection ranges exceeding 28 km. Key Features: - High performance IR continuous zoom lens - Compatibility with 10 µm SXGA/HD and 15 µm 640x512 cameras - Maintains accurate LOS & focus through the full zoom range - Designed for extended range observation & C-UAS systems - Detection range exceeds 26 km

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

We can process various materials using machining facilities such as 3-axis, 5-axis, and profile grinders. (Aluminum, copper, stainless steel, Super Alloy, etc.)

Original compact design and long-term production know-how. System reliability and overall competitiveness.