Since 1993, AMR has become the leading and most recognised journal on defence analysis, affairs and news in the Asia-Pacific region. It is unbiased, objective and authoritative. The editorial content includes capability analysis, special reports and relevant news coverage from the region. It has become the top resource for those working in the Asian military and defence organisations.

The AB-U10 is a 10 kg-class vectored-thrust eVTOL. With a wingspan of 1.8 meters, it features a maximum take-off weight (MTOW) of 10 kg, a range of over 10 km, a payload capacity of 2 kg, and a maximum speed of 160 km/h. The AB-U10 is a lightweight mission aircraft specifically designed for anti-drone operations, equipped with an integrated net gun system.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

It is a product produced in Korea and has high performance when used in EO/IR Gimbal for small drones. It can view both VIS and IR images simultaneously and is coupled to a small drone with a small weight to perform operations. Products with manufactured and domestic IR sensors in Korea. we deliver superior technologies that shape the future of defense. Whether supporting ISR missions or enhancing precision in loitering munition operations, MS60 products are designed to ensure operational excellence in the most challenging environments.

Liquid Measurement System (LMS) capacitance AC and DC fuel gauging probes use lightweight and durable carbon composite materials. In addition to being some of the lightest fuel probes in the industry, they are also virtually immune to corrosion, cracking, dents, and extreme field conditions. Our capacitance probes are inherently crash resistance by collapsing onto itself during hard impact landings to avoid tank penetration and fuel leaks. All electrical connections on the probe are bonded, and there is no friction or riveted electrical connections.

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration

- 1 channel - Up to 100 FBG sensors - Up to 50 kHz sampling frequency