It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The TAC-450 FOG offers exceptional performance in bias stability, scale factor, and angle random walk, and is available in nine configurations to solve the most challenging design projects. The TAC-450 FOG is ideal for air, land, or maritime stabilization and pointing applications. Due to its versatility, and accurate, reliable output, it can also be utilized in navigation, guidance, and control systems. Highlights Designed for maximum ease of integration with housed or unhoused (for OEM configurations) options Available in nine configurations to solve the most challenging design projects Exceptional performance in bias stability, scale factor, and angle random walk 1-, 2-, or 3-axis configuration, each employing the world’s smallest precision FOG Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology* reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-360 IMU provides the safe, accurate performance autonomous platforms demand.

Applied for the Localization Development Project of Core Components in Weapon Systems Conducted basic design for the development for mechanical Mine Sweeping Equipment for MSH, followed by submission of a proposal and presentation for in-person evaluation Patent : Mine Sweeping System with loT Based Functional Float

A Main Generator installed in the KUH series that supplies system power.

Battlefield's Quick Disconnect technology is a leader in the UAV industry, and is now expanding expanding into ground defense vehicles. With over one million hours of successful flight time, Battlefield's quick disconnects have proven exceptional reliability even in extreme environments. EnduroLink by Battlefield has become the global standard UAV quick disconnects, widely applied across small to mid-sized UAV platforms worldwide. Fully customizable integrated design is available, including materials, size, and various end connect options even in the most demanding conditions.

1. Ultra-high Performance LED Searchlight (53,000lm+ max) - Designed with heat sink optimization via thermal analysis for extended illumination. 2. Powerful Broadcasting System (100dB) 3. AI Algorithm for Automatic Object Recognition and Tracking based on Jetson Platform 4. Equipped with EO/IR Cameras for All-Weather Surveillance and Precise Target Identification 5. Hybrid Wired/Wireless System for Enhanced Flight Endurance: Wired Power System, Automatic Wired Detachment Module

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.