Building secure, robust and reliable electronic systems for aerospace and defense applications is critical. You can take advantage of our extensive expertise and technical support to reduce your integration risk and development time. Our development ecosystem includes IP licenses, a variety of demonstration and evaluation kits, reference designs, software, application notes and detailed documentation. Our team of engineering, sales, marketing, logistics and quality experts provide the specialized support that you need to solve your most difficult design challenges.

Green Optics possess proprietary CVD-based Zinc Sulfide (ZnS) production technology for defense and industrial multi-wavelength optical materials. We have core technological capabilities to manufacture high-quality ZnS products tailored to meet diverse customer requirements. ZnS Material Optical Performance and Processing ZnS materials produced through CVD processes provide high transmittance exceeding 70% in the SWIR wavelength range (8-12 μm). When these materials undergo additional Hot Isostatic Pressing (HIP) treatment, the crystal structure undergoes recrystallization, improving transmission characteristics to achieve over 70% transmittance in the visible (VIS) wavelength range of 0.45-0.8 μm. This process extends the application range of optical materials previously limited to SWIR and LWIR bands, delivering superior optical performance across multi-wavelength regions from VIS to LWIR. Material Specifications: - STD-ZnS (Standard ZnS Material): Manufactured via CVD process, exhibits transmittance exceeding 70% in LWIR wavelengths (8-12 μm) with high physical hardness (Knoop hardness: 210 kgf/mm²). - MS-ZnS (Multispectral ZnS): Converted from STD-ZnS through HIP processing, extends wavelength range into the visible spectrum. While crystal structure recrystallization during this process reduces hardness somewhat (approximately 150 kgf/mm²), it still meets MIL specifications. This dual-processing approach enables comprehensive wavelength coverage while maintaining military-grade durability standards.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The 100W High Power Amplifier is an L-band amplifier that delivers 100W output across two channels with a 60% duty cycle. It offers a gain of over 50 dB, with output flatness of 2 dB depending on the input signal level. The amplifier provides an ACLR performance of -20 dBc at maximum output. Equipped with an output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc. Built-in monitoring functions include output signal and temperature monitoring.

6 Series Mixed Signal Oscilloscope; (4) FlexChannels with 62.5M record length, 1-year warranty, Certificate of Traceable Calibration Standard

Manpack RF Jammer Systems provide protection to personnel against remote-controlled explosives. These systems create a protective shield through RF broadcasting and neutralize threats activated by radio, wireless telephones and wireless remote-controlled devices. Backpack-type RF Jammer Systems can be carried easily on the back and with the push-pull apparatus. Continuous broadband operation Programmable Structure Self-test capability DDS technology Control from hand terminal Module selection Malfunction warning VSWR warning Personnel protection through RF-proof textiles

A Main Generator installed in the K2 main engine that supplies power to the system.

Removable shoulder & waist straps can be adjusted to fit the end-user without removing the rack Attaching to select tactical plate carriers with the QASM buckle system or using stand-alone with H Harness Small, medium 4-way stretch Tweave general purpose pouch (Qty.1) Magazine pouches for 5.56mm or 7.62mm mags (Qty. 4) 9mm pistol magazine pouches (Qty. 2) Compatibility : PICO-DSX, PICO-DS, PICO-MBAV, EPIC-FED Composition Material : 500D Cordura® + ARAMID / PV® Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)