The SWE450S is a rugged 3U VPX fully managed Layer-2/3 Ethernet switch aligned with the compute-intensive SOSA profile, delivering high-performance 25/100 GbE switching and flexible I/O reconfiguration. • High-performance 2 Tbps switch fabric with wire-speed throughput • Front: up to 2x 100 GBASE-SR4 (MPO); Rear: 25/100 GbE KR4, 100/1000 BASE-T, USB-C, RS-232Reconfigurable fat-pipe to thin-pipe ports, speed downgrading capability • Dual-core ARM + OpenWare™ management, sanitization support • SOSA-aligned (SLT3), rugged air- & conduction-cooled options

· Cannon laying : Automatic/Semiautomatic /Manual(within 10 secon)ds · Elevation : 45 ~ 85°(driving speed 10°/sec) · Deflection angle : 360°infinite (driving speed 20°/sec) · Sighting Error : Max 3 mil(1σ) · Navigation System : Send location/orientation information

From precise control of various optical components(laser/detector/amplifier) & laser beam alignment(QD/FSM), a data rate of 10G can be achieved over distances of several thousand kilometers.

BERNIER designed the CMA-USBC line specially for equipment in harsh environments. The CMA-USBC connectors are Push-Pull military connectors that offer many possibilities of electronic integration as : USB Memory key, Authentification key, Wireless module, Crypto and Shunt module…

NarSha is a dedicated small satellite for monitoring methane (CH₄) emissions, a key contributor to the climate crisis. It is the first satellite of its kind in South Korea to be developed and led by a private company. The launch of NarSha-1 is targeted for the fourth quarter of 2026.

Toxic gases, such as Silane (SiH4), Nitrogen Trifluoride (NF3), Sulphur Hexafluoride (SF6), Ammonia (NH3), Nitrous Oxide (N2O), etc. must be contained in IMDG certified MEGC tubes for ocean transportation. For high purity gases such as SiH₄, and NF₃, DS Aether CT provides internal-polished tubes to a grade of 3S, 25S, etc. depending on customer's requirements. DS Aether CT’s tubes keep moisture levels below 1 ppm or 3 ppm by a heated vacuuming process so that gas quality can be maintained at high purity level.

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)