r-TWR are digital towers which enable the remote use of air traffic services (ATS) from any location. Being at an airport, air base or at a centralised location, distance is no longer a factor. The r-TWR functions can be integrated to a traditional tower as a hybrid solution, and can support the ramp and apron management using the same information. It can also be deployed and put in place when needed. Through the use of digital camera technology and sensors, operators can effectively conduct and manage various services remotely, based on visual surveillance. This removes the need to be on-site and occupying critical space at an airport, in favour of a chosen location.

DA 22-BLDC Brushless Actuator To guarantee maximum safety and reliability, its brushless motor and contactless, wear-free position sensing system makes the DA 22 BLDC immune to wear, vibrations and shock loads. It has especially been designed for usage in harsh environments and for safety-critical applications that require an actuator with high endurance. The conductive aluminum case and the shielded connection cable are reducing the susceptibility to any kind to EMI/RFI noise to the absolute minimum.

The AGTR-NEO is engineered for dynamic applications, offering a high sampling rate for single-channel measurements and efficient multi-channel acquisition. Its DO-160G qualification underscores its suitability for aerospace integration. Key Features: - 8 Optical Channels, sequential sampling - 19.2 kHz Single-Channel Sampling, 50 Hz for 8 channels - DO-160G Qualified - Onboard Data Processing and Storage: Integrated miniature single board computer for efficient data handling. - Compact and Lightweight - Flexible Mounting: Designed for easy installation with multiple M4 mounting points. - Ethernet Communication: Supports TCP or UDP protocols. - ARINC 801 Optical Interface: Ensures compatibility with aerospace communication standards.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

Large Area Display Head Unit is included in avionics equipments used in the cockpit of an aircraft. Its wide screen vision development implements Full Glass Cockpit in aircraft. It also provides processing with more efficient yet less complicated circumstance with maximum 4 external input video signals Options that can be provided are - 20"x8" LCD Glass, LCD Module and Entire LAD system unit

SCD’s advanced 12μm VOx Microbolometer stands out as the ideal choice for VGA LWIR systems. With its exceptional image quality, remarkably low Noise Equivalent Temperature Difference (NETD), very low time thermal constant (Tau), rapid image acquisition, and minimal weight, SCD’s Microbolometer ranks among the leading LWIR sensors in the market. It is suitable for a wide range of applications, specifically tailored to meet challenges associated with Size, Weight, Power (SWaP) constraints and highly dynamic applications. This product continues SCD’s long heritage uncooled detectors technology, along with our 25μm and 17μm pitch families, fielded and combat proven for more than 20 years.

D-100-C repair & Bleeding