KVPX+ Series is an embedded interconnect system that provides unrivaled performance in harsh environments while adapting to the VITA standard design requirements. KVPX+ Series is a shielded, high-density, high-speed, modular interconnect system optimized for differential pair architectures on a 1.8mm x 1.35mm grid.

It is an UAV recovery system that lands a fixed-wing UAV even in mountainous terrain where there is no sufficient runway for landing. The UAV is damping through a net mounted on the vehicle and lands on an air-cushion mat. It has the advantage of being easy to deploy in places where vehicles can enter and exit. But the type of the aircraft capable of stable landing is limited.

The PolarFire FPGA and PolarFire SoC families already deliver the industry’s best thermal and power efficiency in the mid-range segment. Optimized for deploying systems with high-compute performance in small form factors, the families have reduced the size and weight of power-constrained systems in applications including industrial imaging, robotics, AI-enabled medical systems and smart defense and aerospace systems.

Active phased array fire control radar (AESA) for aircraft A fire control multi-function radar (MFR) that can simultaneously detect, identify, and track multiple targets, including in the air and on the ground, and has SAR and NCTR functions. Aircraft (fighter)-mounted AESA radar is a core sensor for fighter jets to perform day/night/all-weather multiple missions. It operates in multiple modes such as air-to-air/air-to-ground/air-to-sea/support mode, and acquires ground images and air/ground in electronic warfare situations. It is essential mission equipment for fighter jets that detects/tracks multiple targets and supports guided missile guidance and gun shooting.

FOBEX 38999 MIL-DTL-38999 An optical connector which is applied to beam expanding optical signal transmission technology into a connector designed according to military standards. It can be used in a variety of adverse conditions such as extreme temperature, vibration, shock, humidity, and dust. It has little impact from outdoor contamination and is easy to maintain, making it easy to use tactically. FOBEX 83526 Ensures stable and reliable data transmission in extreme environments. Designed with a hermaphrodite type for easy connection and disconnection over 3,000 times, the extended beam technology minimizes loss caused by dust or contaminants from outdoors. FOBEX-P Fiber optic ferrules with expandable beam technology, designed to replace 1.6mm military fiber optic ferrules for tactical applications

Large Area Display Head Unit is included in avionics equipments used in the cockpit of an aircraft. Its wide screen vision development implements Full Glass Cockpit in aircraft. It also provides processing with more efficient yet less complicated circumstance with maximum 4 external input video signals Options that can be provided are - 20"x8" LCD Glass, LCD Module and Entire LAD system unit

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

These units are very compact in size and weight is less than 400 kg. Units in this compartment can have rated output power up to 90 kVA. Units are fully compliant with the required parameters and are used as solid state units. EAC-series frequency converters are strictly compatible with all types of aircraft requiring output AC and confirm the international standards.