Stay in touch with ASI. Enter your e-mail and subscribe to our newsletter. Email Full Name Once signed up, you will begin receiving our newsletter. We will not sell or distribute your email address to any third party at any time.*After clicking subscribe you will receive a confirmation email.

The MD70MH-DroneCAN is an 11.6mm, metal gear, 13-gram micro servo for higher voltage applications. Featuring a single output ball bearing, cored brush motor, and magnetic rotary encoder, the MD70MH-DroneCAN is often used in compact fixed wing UAV and drone applications where space and weight are mission critical concerns. The MD70MH utilizes DroneCAN (formerly UAVCAN) control at a voltage range from 4.8~7.4 volts. #UAV #UAS #UGV

The AB-M1300 is a 1.3 ton-class eVTOL AAM. With a wingspan of 10 meters, the AB- M1300 is a crewed–uncrewed hybrid aircraft aiming for commercialization in 2028. Falling under the Light Sport Aircraft (LSA) certification category, it can carry up to two occupants, reach a maximum speed of 400 km/h, operate for two hour of flight time, has a maximum take-off weight (MTOW) of 1.3 tons, and a payload capacity of 250 kg. The AB-M1300 is designed for a variety of missions, including mid-mile logistics, personal leisure use, and pilot training.

DA 22-BLDC Brushless Actuator To guarantee maximum safety and reliability, its brushless motor and contactless, wear-free position sensing system makes the DA 22 BLDC immune to wear, vibrations and shock loads. It has especially been designed for usage in harsh environments and for safety-critical applications that require an actuator with high endurance. The conductive aluminum case and the shielded connection cable are reducing the susceptibility to any kind to EMI/RFI noise to the absolute minimum.

FMP is built around Moog’s world-renowned military motion control technology. Options include integration of Moog’s high-performance stabilization and weapon stores management systems (SMS), providing missile firing capability to suit any mission. Missiles previously only launchable from helicopters may now be fired from ground vehicles with missile combinations able to suit any mission need from any platform.

This product supports the following transmission standards. Designation Bit Rate ========== ========== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

Portable thermal target with day/night combined shooting training. Application of advanced thermal sensing technology to realistically reproduce various combat situations to improve the user's shooting ability. Heat generation performance can be achieved through multiple fires, increasing shooting training efficiency and reducing operational costs.