This very compact optical system with an original design allows two groups of lenses to be moved in perfect coaxiality (+/- 1µm) over several millimeters. It is particularly recommended for applications requiring a constant alignment precision when moving the lenses. The perfect coaxiality of the lens holders is guaranteed by a common bore machined in a single operation. Numerous dimensional modifications allow a perfect adaptation to the optical design related to its application. Due to the use of perfectly adjusted ball cages, its low-friction translation mechanism is best suited for intense use and offers an unequalled lifetime without any particular maintenance.

Our products include brake clips and brackets.

Our cargo system product line includes brackets, buckles, rollers and other hardware.

The IMX-5™ includes Attitude Heading Reference System (AHRS) sensor fusion to estimate roll, pitch, and heading. Adding GNSS input to the IMX-5 enables onboard Inertial Navigation System (INS) sensor fusion for roll, pitch, heading, velocity, and position. Features Tactical Grade IMU Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Surface Mount Reflowable (PCB Module) Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

Processor - 64-bit Quad Core PowerPC QorIQT2080 up to 1.2GHz - 6 DMIPS/MHz per core (up to 28,800 DMIPS@1.2GHz) - 128b AltiVecSIMD unit (up to 38.4 GFLOPs@1.2GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 6U VME - Conduction-Cooled, Air-cooled support

Pandion Perception provides a robust solution for autonomous navigation, Advanced Driver Assist (ADAS) and mapping in GPS-denied environments, efficiently generating the low-latency spatial data that every autonomous system needs. Mounted on ground vehicles or uncrewed platforms, our 3D spatial sensing systems enable operation environments where GPS is degraded or denied - such as dense urban areas, subterranean infrastructure, or contested military theatres. These capabilities are tailored for missions and logistics operations, offering reliability and precision where traditional systems fail.

The ACTUS® CORE-2 Dot Sight is a high-performance optical device chosen as the Warrior Platform Selection Equipment by the Republic of Korea Army (ROKA). Built to MIL-SPEC standards, it is a further development of our ACTUS® CORE-1 Dot Sight. Housed in a smaller form factor, the ACTUS® CORE-2 meets rigorous military requirements, including extreme temperature resistance, shock testing, waterproofing, and protection against fluid contamination. Designed for durability and reliability, the CORE-2 enhances operator safety in the field, ensuring quick and precise target acquisition during critical missions.

The SC-SSGMRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SSGM(Synchronous Signal Generation Module). When the SSGM(Synchronous Signal Generation Module) board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SSGMRTM board into the back of the Backplane. Three 37-pin Micro D-sub ports are used to send synchronization signals generated by SC-SSGM to the outside or to receive external synchronization signals, Three separate MMCX output ports are prepared to support test equipment such as oscilloscopes, and you can convert them to various signals and output them.