When your missions take you into extreme environments, the Bell 412 will always have your back. With the cabin you need for passengers and cargo, nothing and no one will get left behind.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Mil-COTS Isolated DC-DC converters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. These “off-the-shelf” converters are compatible with the industry standard format, operate at a fixed frequency, and follow conservative component derating guidelines. MilQor products are designed and manufactured to comply with a wide range of military standards.

Micro-D Twinax Connectors (MDTX) offer Twinax blindmate assemblies fitted into a low-profile metalized Micro-D style shell, high speed signalling capable of 100 Ohm differential pair matched impedance, maximum space utilization, ultra miniature size and high vibration capability, extremely light weight and modular with true signal integrity.

NVIDIA IGX is a cutting-edge AI platform delivering high-performance, secure, and reliable computing. Built on autonomous-driving expertise, it supports industrial automation and medical devices, with PCIe expansion for extra vision inputs and full-stack enterprise-grade software and long-term support.

The EXOpod is the most advanced cubesat deployment system on the market. It is available in 6U/8U, 12U and 16U sizes which can be broken down into smaller slots to accommodate cubesats of any size. EXOpod Nova, the latest generation of the EXOpod line, is rapidly expanding what the cubesat design standard (CDS) is capable of – cubesats launching with Nova can now increase the volume of their lateral protrusions by 400% and their mass by 30%, enabling a wider and more powerful array of satellite designs and use cases.

Consists of a Data Transmission and Recording Unit (DTRU) for data transmission and collection, and a Removable Mass Memory (RMM) for data storage. Stores pre-planned flight mission data in the RMM on the ground and transmits it to the aircraft via the DTRU. Collects various mission data (flight data, monitoring data, video data, and audio data) during flight, stores it in the RMM, and transmits it to the ground for mission analysis. - x5 ARINC-818 Recording as H.264 - x2 Analog audio recording - x7 MIL-STD-1553B Bus Monitoring - x2 Gigabit Ethernet Monitoring - 512GB Solid-State Disk (up to 2TB) - Size : 160.1x146.0x232.4 mm - Weight : 4.25Kg - Power : MIL-STD-704F (28VDC, 58W) - Environment: MIL-STD-810G - EMI/EMC: MIL-STD-461G

No Coding Required: Create XR content effortlessly with a drag-and-drop interface. Industry-Specific Solutions: Suitable for manufacturing, logistics, energy, and various industries. Multi-Device Compatibility: Works on PCs, tablets, smartphones, and smart glasses (VisionX). Real-Time Collaboration: Multiple users can edit and share content simultaneously.