It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

L3Harris combines speed, innovation and flawless execution to deliver the best solutions as quickly as possible.

Primarily used in medium-sized and large satellites, it provides high torque performance and momentum conservation. By localizing the Control Moment Gyro controller, which had previously been imported for Korea’s domestic satellite industry, Lumir has gained a competitive advantage in both performance and cost.

The nose wheel assembly refers to the complete integrated unit consisting of the wheel, tire, axle, bearings, and associated structural components. In some configurations, it also includes steering mechanisms, shock absorbers (oleo strut), and braking systems (for specific aircraft types). The assembly is engineered for durability, precision, and reliability, enabling the aircraft to safely absorb impact forces during landing and provide accurate steering during taxiing.

The PolarFire FPGA and PolarFire SoC families already deliver the industry’s best thermal and power efficiency in the mid-range segment. Optimized for deploying systems with high-compute performance in small form factors, the families have reduced the size and weight of power-constrained systems in applications including industrial imaging, robotics, AI-enabled medical systems and smart defense and aerospace systems.

WPGM0507100M is a 12W Gallium Nitride (GaN) Monolithic Microwave Integrated Circuit (MMIC). WPGM0507100M is useful for high power C-band applications including 5.8GHz ISM-band systems. Spec Frequency : 5-7GHz Saturated Output Power : 100W@6GHz PAE : 51% Power Gain : 27.7dB@6GHz Operating Voltage : 28-32V

The Nokia Banshee 5G and 4G Tactical Radio delivers a resilient, mission-critical communications network for small teams operating in the most austere environments. Designed for warfighters operating at the tip of the spear, the Banshee 5G and 4G Tactical Radio provides an encrypted private wireless network in a low Size, Weight and Power (SWaP) form factor. The battery or AC-powered Banshee 5G and 4G Tactical Radio keeps teams connected to share real-time Situational Awareness across the mission space. Whether deployed in urban settings or remote, hostile terrains, the Banshee 5G and 4G Tactical Radio offers the durability and performance to keep the mission moving forward without compromise.

Threaded bushing enables localized reinforcement of and attachment to panel structure. Supplied with disposable installation fixture. 1.25" Flange Diameter. SIZES: Imperial fine thread sizes from 10-32 (.190"-32) to 3/8-24 (.375"-24), Imperial coarse thread sizes from 8-32 (.164"-32) to 3/8-16 (.375"-16), and metric thread sizes from M5 to M8. 1.25" Flange Diameter. Grip lengths from 0.25" to 1.50". MATERIALS: Aluminum, 300 Series Stainless Steel, A-286 Stainless Steel, 316 Stainless Steel, and Titanium. Optional epoxy primer. FEATURES: Standard 1.25" diameter flange, 0.75" x 1.25" trimmed flange optional.