· Based on proven KSS-III submarine, highly reliable platform · Full lithium-ion battery system with over 7 days submerged endurance without snorkeling · Integrating X-rudder configuration to enhance maneuverability and control performance · Dedicated SOF Lockout Trunk optimized for special force operations with inflatable boats, engines and gears for all SOFs

1. Maintenance • Depot Maintenance • Structure & Avionics Replacement, Repair, Wire Harness, Test and Inspection 2. Upgrade & Modification • Structure Upgrade and Modification • Avionics Upgrade, System Integration, Test and Inspection Highlights √ Final Assembly incl. Engine Installation √ System Integration, Test & Inspection Project Highlight : KT-100 & Light Sport Aircraft (Final Assembly), HH-60, CH-53, CH-47, F-16, P3-c, C-130H, AS-1S, MD500, NG RQ-4B ( Logistic & Ground Support)

This product supports the following transmission standards. Designation Bit Rate ========== ========== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.

Inverter platform developed by entirely by Drive System Design with a focus on versatility and flexibility, resulting in a powerful and highly versatile hardware and electronics base platform, which can operate: - From 200 to 800V and beyond, - At a Continuous Output of 450A rms - Delivering an output Power up to 300kW and - A PWM frequency from 20 to 30kHz

The M109A7 is the latest howitzer in the BAE Systems M109 family of vehicles, the primary indirect fire support system for the ABCTs. It uses the existing main armament and cab structure of a Paladin M109A6, and replaces the vehicle’s chassis components with modem components common to the Bradley vehicle. The improved chassis structure provides greater survivability and commonality with the existing systems in the ABCT, reducing operational sustainability costs by replacing obsolete components. The M109A7 is supported by the Army as a vital technology enhancement program to maintain the combat capability of its ABCTs. The M109A7 will solve long-term readiness and modernization needs of the M109 family of vehicles through a critical redesign and production plan that leverages the most advanced technology available today. This state-of-the-art “digital backbone” and power generation capability provides a more robust, survivable and responsive indirect fire support capability for ABCT Soldiers. The M109A7 is considered to be the most cost-effective method to significantly improve sustainability and survivability, while reducing the logistics burden on the ABCT and supporting fires brigades. The program will be executed as a public/private partnership between the Army’s Project Manager-HBCT, Anniston Army Depot and BAE Systems that leverages the strengths of both public and private sectors to ensure the best value for U.S. Soldiers.

This solution follows a three-step process of input, processing, and output, utilizing imagery, DEM, AT, and spatial data to refine 3D models. The editing-based texturing function allows users to correct shape errors, occlusions, and distortions, while the automated texturing ensures consistency and accuracy through advanced geometric matching. Final outputs are stored in standard formats for broad practical applications.

aviation fuel refueling cart : Mobile refueling cart that can easily refuel light aircraft and helicopters Sump recovery system : Collect the drained/sumped aviation fuel from the aviation fuel refueling system, easily sample and test it, and then decide whether to drain it or return it to the system. Aviation fuel refueling system : The aviation fuel refueling system is compactly constructed with a skid for easy use and installation.

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.