Collects data from various sensors within the aircraft system, converts it into the required format, and transmits it to the mission computer or flight control computer. Converts control commands received from the mission computer or flight control computer and relays them to sensors and other peripheral devices. Supports system control functions, monitors the status of key systems, and provides feedback. Achieves 70% cost competitiveness compared to equivalent-performance products. - x2 MIL-STD-1553B - x2 UART (RS-422/485) - x24 Analog input interfaces - x8 Analog output interfaces - x64 Discrete input interfaces - x40 Discrete output interfaces - Size : 270 x 270 x 62.2mm - Weight : 2.5Kg - Power : MIL-STD-704F (28VDC, 10W) - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

A hallmark of the U.S. economy is its vibrant and innovative services sector. U.S. services are respected globally, opening the door for American companies t...

- FOG based Inertial Navigation System for Gyrocompass - Position Accuracy(INS/GPS): < 3 m - Heading Accuracy: < 0.1º  sec (LAT) - Attitude Accuracy(Static): 0.01º - Attitude Accuracy(Dynamic): 0.01º - Operating Voltage: 9 to 36 VDC - Power Consumption: < 15 W (typ.) - Dimension(L x W x H): 330 mm x 192mm x 180mm

Featuring an ultra-compact package of less than 5 cubic inches, the TAC-440 delivers 1°/hour gyro bias with 1 mg accelerometer bias stability and very low 0.05°/√hour angle random walk (ARW) over wide temperature ranges. The breakthrough performance of the TAC-440 IMU is based on a EMCORE’s proven quartz MEMS inertial sensor technology. EMCORE’s quartz technology enables repeatable, high-volume production of precisely machined sensor structures combined with the inherent large signal output and thermal stability of quartz materials. The TAC-440 is a compact IMU constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The TAC-440 IMU is designed for demanding, mission-critical, rugged environments. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection make the TAC-440 IMU easy to use in a wide range of higher order integrated system applications.

It is designed to be suitable for difficult environments and can be applied to high torque and angle control. Applications are Missile defense, Torpedoes, Anti-drones system, Underwater drones.

This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.

We empower businesses to leverage Extended Reality (XR) for training, skill development, and digital transformation. Whether you need us to develop Virtual Reality (VR), Augmented Reality (AR), or Digital Twin simulations, or prefer to create immersive content independently, WEAVR supports you with the cutting-edge no-code platform. Born from the aerospace industry, WEAVR leverages the same precision and operational excellence required in mission-critical environments to elevate training and simulation across multiple industries. From Manufacturing and Energy to Healthcare, Defense, Safety and beyond, we provide organizations with the next-generation immersive tools to optimize performance, enhance safety, and drive innovation. WEAVR enables organizations to quickly and easily produce, deploy, and manage engaging XR experiences without any coding skills. Designed for scalability and seamless integration, it helps businesses: Enhance training retention and engagement Accelerate skill development Reduce costs and time to deployment Standardize protocols across teams Onboarding program Gain real-time insights for continuous improvement Our goal? Turning your ideas into scalable Extended Reality training solutions. Extended Reality-driven training and innovation are already here.