It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The Metravib Defence PILAR V Naval Version is an advanced acoustic sensor designed to detect and pinpoint enemy positions. Designed for installation on Special Operations boats, like coastal patrol vessels, rapid intervention or fast patrol boats, it enhances crew and boat survivability while significantly improving situational awareness.

Solution Overview KWM-Ocelot (AI Electromagnetic Spectrum Reconnaissance System) is a self-developed solution that measures field strength and clearness of 5G/4G base station signals and automatically analyzes abnormal waveforms based on time-series data. Main Features Real-time wideband frequency scanning using an RF detector mounted on unmanned complex systems AI-based signal characteristics and transmitter location analysis Real-time transmission and visualization of analysis data to ground control stations (GCS) via data link Identification of locations such as enemy drone and equipment operation areas, and command posts Effective tracking and jamming of enemy communications Key Advantages Automated signal classification and pattern learning based on AI Real-time visualization of battlefield electromagnetic spectrum distribution Effective signal detection, analysis, and tracking in various military environments Fully in-house developed, enabling rapid technological application and operational optimization Applied Cases Winner of the Grand Prize (Army Chief of Staff Award) at the 2025 Army Artificial Intelligence Idea Contest Real-time reconnaissance of battlefield electromagnetic environments and enemy communication tracking in military operations

Developed in 2002 as a single-soldier, short-range, anti-tank weapon system, we continue to work with soldiers to provide the weaponry needed to succeed. Backed by nearly two decades of experience, the resurgence of the tank in battle validates our expertise in this field. It’s the same old story – and David still beats Goliath.

Your Benefits: Stunning Image Quality SWaP-Optimized, Smallest Shape, IP69K Protection Ultra-Low Latency G2G (Glass-to-Glass) Frame Rate: 60 Hz Increased Optical Resolution 2.1 MP, 1920 x 1080 Dynamic Range: 120 dB Integrated Heater for De-Icing / De-Misting FoV 53°, Alternatives tbd

Each Snowball Edge device can transport data at speeds faster than the internet. This transport is done by shipping the data in the devices through a regional carrier. The appliances are rugged, complete with E Ink shipping labels. Snowball Edge devices have two options for device configurations—Storage Optimized 210 TB and Compute Optimized.

The EPNR1000 is a drone-mounted 5G base station integrating CU-DU-RU, with 5G Core and an IP-PTT application server built in. All 5G network elements are combined into a single unit, allowing standalone operation (IOPS). Mounted on a drone, it can provide line-of-sight coverage over obstacles like buildings or mountains, making it an ideal system for delivering 5G services over wide areas during disasters or military operations.

The extended range of products offered through AMA is also reflected in the range of services provided. Each company has its own processing capabilities which vary from business to business. In essence, the collective capability of AMA embodies the latest technology to meet the needs of any specific metal processing requirement, including but not limited to: Cutting shape cutting milling surfacing sawing drilling guillotining waterjet cutting USI testing heat-treating or re-tempering forgings machining to near net shape