The lightest plate carrier 4-way stretch Tweave sewn internally for comfort Poly mesh cummerbund for increased ventilation Rear internal pocket for storage Elastic webbing straps for cable management PALS webbing for MOLLE attachment Removable front flap Zipper for DS Assaulter's Zip-On Back Panels QASM buckle System Available in different shapes depends on the plate thickness Soft armor can be added Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

HyperStac RX Series is a Z axis interconnection solution designed for all types of micro-electronics applications requiring reliable and compact packaging solutions. The Hyperstac RX Series meets the needs of the Defence, Avionics and Space electronics applications.

The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.

Adjustable stator vanes that control airflow angle entering the rotor blades.

Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation XFrame® Dynamic Load Carrige® compatible Compatible with our entire accessories line Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for Assaulter's Zip-On Back Panels QASM buckle system Holds up to five 5.56mm magazines Internal plate pocket retention straps accommodate several different plate thickness Soft armor included Composition Material: 500D Cordura® + ARAMID/PV® Size : Small / Medium : 8.5" x 11.5” -9.3" x 12.3" Plate Pocket Front Panel Area of Coverage : Length 13.25” Width 11" Large / XLarge : 10" x 13"- 10.9" x 13.8” Plate Pocket Front Panel Area of Coverage : Length 15" Width 12" Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.