ELECTROMECHANICAL RELAYS

The Striker II digital Helmet-Mounted Display (HMD) builds on the decades of combat-proven performance by the Striker HMD, used on Typhoon and Gripen aircraft. The only full color solution with integrated night vision available anywhere, Striker II gives pilots unparalleled situational awareness, next generation EBAPS™ night vision, optional 3D audio, and battle proven target tracking technology - all in an integrated, visor-projected digital HMD system.

Consists of a Data Transmission and Recording Unit (DTRU) for data transmission and collection, and a Removable Mass Memory (RMM) for data storage. Stores pre-planned flight mission data in the RMM on the ground and transmits it to the aircraft via the DTRU. Collects various mission data (flight data, monitoring data, video data, and audio data) during flight, stores it in the RMM, and transmits it to the ground for mission analysis. - x5 ARINC-818 Recording as H.264 - x2 Analog audio recording - x7 MIL-STD-1553B Bus Monitoring - x2 Gigabit Ethernet Monitoring - 512GB Solid-State Disk (up to 2TB) - Size : 160.1x146.0x232.4 mm - Weight : 4.25Kg - Power : MIL-STD-704F (28VDC, 58W) - Environment: MIL-STD-810G - EMI/EMC: MIL-STD-461G

Collects data from various sensors within the aircraft system, converts it into the required format, and transmits it to the mission computer or flight control computer. Converts control commands received from the mission computer or flight control computer and relays them to sensors and other peripheral devices. Supports system control functions, monitors the status of key systems, and provides feedback. Achieves 70% cost competitiveness compared to equivalent-performance products. - x2 MIL-STD-1553B - x2 UART (RS-422/485) - x24 Analog input interfaces - x8 Analog output interfaces - x64 Discrete input interfaces - x40 Discrete output interfaces - Size : 270 x 270 x 62.2mm - Weight : 2.5Kg - Power : MIL-STD-704F (28VDC, 10W) - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G

For electrical and electronic signal connections inside and outside the hermetic equipment, it reliably protects the device from extreme temperature/humidity changes, vibration and physical/chemical effects, and transmits signals and currents without loss. These connectors use special glass or ceramic as insulation and are used in furnaces, power breakers, submarines, gas control systems, transformer safety devices, etc. Key features of closed connectors: It completely blocks the interior from the outside environment to keep it vacuumed or pressurized. Durability: It works reliably in extreme environments (high temperature, low temperature, humidity, chemicals, etc.). Electrical performance: It delivers electrical signals or power without loss.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

NO MELT, NO DRIP (50/50 NYLON COTTON) Incorporated ventilation system and COOLMAX & Mesh fabrics to ensure comfort and breathability Multi-pattern round processing for free movement Velcro® webbing for MOLLE attachment to support scalability Chest and sleeve side pockets to improve storage convenience Use MIL-SPEC threads and YKK zippers Composition Material : NYLON 50% / COTTON 50%, COOLMAX, MESH Size : 95~115 Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)