- 3 axis Fiber Optic Gyroscopes / 3 axis MEMS Accelerometers - Operating Range: ± 490º/sec - Bias Repeatability(over temp. range) : ≤ 0.5º/hr (1σ, RMS) - In-run Bias Stability: 0.03º/hr (typical, 1σ) ≤ 0.05º/hr (max, 1σ) - Angle Random Walk : 0.025º/√hr (typical, 1σ) - Power Consumption: 5W @ 25℃ (< 8 W, @ - 40℃) - Input Voltage: + 5 V Lightweight Package: 790g (1.74 lbs)

Slim, ergonomic full coverage vest Perfect fit for women 360 degree soft armor protection Taktic buckle system for quick connect & release Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for MV Assaulter's Zip-On Back Panels Increased structural integrity and reduced rear deformation Compatible with our entire accessories line Soft armor included Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

When your missions take you into extreme environments, the Bell 412 will always have your back. With the cabin you need for passengers and cargo, nothing and no one will get left behind.

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

Optical encoders for defense and space applications: missile seekers weapon stations radar electro-optics systems space mechanisms (CMG, SADM, APM)

The EL4000 is an RU/DU-integrated LTE outdoor base station that provides long-distance LTE service outdoors and has been supplied through KT for the Ministry of Oceans and Fisheries’ LTE-M network.