Developed as Korea’s first hydrogen-and-battery hybrid propulsion system, this next-generation eco-friendly aircraft uses electric batteries for take-off and hydrogen fuel cells for cruise flight, achieving a new standard in sustainable aviation. Recognized as a world-first intellectual property, this model also became the first hydrogen hybrid Advanced Air Mobility (AAM) aircraft in Korea to receive Special Airworthiness Certification from the Ministry of Land, Infrastructure and Transport in 2024.

1) Fabrication - possible Dismension : ~ D 1200 mm - Surface Errors PV < 79 nm RMS < 12 nm Roughness < 2 nm(Typical < 1nm) 2) Lightweight - lightweight Ratio : up to 82.5 % - Rib Thickness : ~ 2 mm - Face Sheet : ~ 7 mm - Lightweight Design & Fabrication

Product Information Frequency signal generator for high-performance, high-precision target detection High-frequency resolution design and frequency conversion function using DDS method main performance Frequency: L-Band ~ X-Band Pulse Mode, Low spurious Output Level: -10~+15dBm Range Spurious: -55dBc min Harmonic: -50dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 70dBc Min Applicable fields High-precision targeting guided weapon tower system and radar system can be applied

Mixed Signal Oscilloscope (4) Analog Channels, 10M record length, Certificate of Traceable Calibration Standard

Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

The system is designed to maximise installation flexibility, through optional power and diagnostics data over RF (permitting the use of a single cable), and a highly reconfigurable baseplate to allow the mounting holes and connector type/ position to be tailored to the target platform. Use of Chelton’s established and field-tested GNSS Anti-Jam core firmware provides a high degree of protection against complex threat scenarios and in highly dynamic environments. A software definable core allows future upgradeable ‘Signal Intelligence Apps’ to be hosted, providing the user with situational awareness of the battlefield environment and allows feedback into mission planning activities.

Designed and manufactured to ensure flawless connection between precision striking functions, even in extreme temperatures, varying altitudes, and impact environments.

Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.