[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

The First & Only Autonomous AI Pilot Deployed Since 2018

Similar to a human pilot, Hivemind reads and reacts to the battlefield, and does not require GPS, waypoints, or comms to make decisions. Hivemind enables intelligent teams to perform missions ranging from room clearance with Novas, penetrating air defense systems with V-BATs, to dogfighting F-16s.

Intelligent Teaming

Shield AI’s synthetic environments combined with human-machine tactics and behaviors. Testing and learning in real physics simulations reduces engineering cycle times and enables rapid real-world deployment. Welcome to the defense metaverse.

Edge Autonomy

The aircraft uses sensors to create a map or world-view, the computer then tells the aircraft or autopilot where to go and what to do to execute its mission. No GPS, no waypoints, and no comms are needed for aircraft to accomplish their missions.

Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

Short-Wave Infrared(SWIR) Camera is an imaging device that detects reflected light in the 0.9–1.7 μm wavelength range. Compared to visible light, SWIR enables longer-distance observation and provides high-resolution imagery even in degraded visual environments, such as fog, haze, or dust, where conventional visible cameras cannot operate effectively. These capabilities are realized through the use of InGaAs sensors, offering precise detection and surveillance that are unattainable with visible-light imaging. Accordingly, SWIR cameras serve as an advanced imaging solution not only for military, security, and disaster response applications, but also for industrial inspection and research fields.

- Application of patented expansion technology to resolve narrow space operation. - Equipped with camera function utilizing foldable mast. - Drone take-off and landing system using internal lift. - Equipped with a monitor for situational identification and a console for drone operation control.

1. Certification Status Certified by the Korea Fire Institute (KFI) Certified under the latest KFAC (Korea Fire-fighting Apparatus Certification) CE certification currently in progress 2. Product Description Composition: Backrest, Facepiece, Cylinder Accessories: Auxiliary Mask, Bone Conduction Communication Device (facepiece- or headset-mounted), HUD, etc. 3. Features and Benefits -> Wide Full Face Mask: 360° curvature reduces blind spots. Medical-grade silicone minimizes skin irritation during long-term use. Equipped with a 360° rotating supply valve. -> Type-4 Containers: Internal PET liner prevents contamination. 20% lighter than Type-3 containers. Built-in Excess Flow Valve (EFV) protects against emergency damage in case of container breakage. -> IT-Integrated Backplate: Features a thermal imaging pressure indicator with TIC camera, PASS life-saving alarm, ambient temperature and height display, container pressure and remaining time, visual/audible alarms, Bluetooth connectivity, and NFC-based crew monitoring (entry/exit logs). Includes weight-distributing design and rapid charging function. -> Flexible Pricing: Various models are available with different features and price points, allowing selection based on individual needs.

Our broad alloy portfolio enables customers to achieve higher efficiencies, reduce pollution levels, extend product life, and reduce costs. Our corrosion-resistant alloys are generally distinguished by the HASTELLOY® brand and our high-temperature family of alloys are generally distinguished by the brand.

1. Technical collaboration leveraging KAI's expertise in Surion(KUH) and LAH helicopters 2. Expanding AMO maintenance types and repair/modification capabilities [Rotary Wing Business] - Periodic Maintenance for KUH-1 and MUH-1 - Modification & Installation/Periodic Maintenance for EC-225 - Periodic Maintenance for AW-139 - Performed assembly work for Bell's B-505 helicopters