< Frequency Range > ● 2500 ~ 6000 MHz < Output Power (W) > ● 35 < Gain (db) > ● 46 < Power Supply (V) > ● 30 < Current (A) > ● 10 < Dimension > ● 175.3 x 91.4 x 28 (mm)

Next-generation wheeled military vehicles are essential to secure maneuverability and survivability for efficient power operation even in the worst weather and terrain conditions, so we have developed a run-flat product with pure domestic technology that can drive to a safe zone where tires can be repaired and replaced with quality that meets the standards of the United States and NATO (North Atlantic Treaty Organization) while ensuring stable steering and driving performance by applying our unique design in the event of tire pressure loss due to tire damage. Based on this, we produce and supply run-flat-related products to wheeled military vehicle manufacturers.

Signaty X IR Helmet Strobe is a next‑generation, domestically developed IFF LED device. It features IR plus RGBW color LEDs (red, green, blue, white), all housed under a high‑strength polycarbonate dome. It supports multi‑wireless synchronization via short‑range communication, GPS/RTC, and mesh relay—enabling simultaneous use of RGB LED + IR or RGB LED + white LED, with up to 42 pattern synchronizations (expandable to 252) using 256‑bit encrypted data. Runtime reaches up to 130 hours (LED 130 h / IR 125 h) on a single AA battery. Built to MIL‑STD‑810G and KC standards, it ensures drop, dust, sand, immersion, and temperature resistance. Manufactured in Korea with domestic service support.

EMCORE’s SDI170 IMU is designed as a performance-compatible inertial system that is form, fit, and functional with a legacy RLG-based IMU product, but with superior overall performance, versatility, and a significantly higher MTBF (Mean Time Before Failure) rating over ruggedized environments. The tactical performance of the SDI170 IMU is based on EMCORE’s mature, proven, dependable and accurate quartz MEMS inertial sensor technology in our SDI500 tactical-grade IMU. EMCORE’s quartz technology enables repeatable high-volume production of precisely machined sensor structures combined with the inherent large signal output and thermal stability of quartz materials. The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

The SBC6511 Rugged Single Board Computer(SBC) from Abaco Systems features the new high performance, highly integrated Intel® Xeon® E processor (‘Coffee Lake Refresh’). Powered by Intel® Xeon® W processors, offering robust computational power. • Supports up to 64 GB DDR4 SDRAM with ECC and up to 256 GB (or in some variants up to 480 GB) NVMe SSD storage • Offers high-throughput networking: Dual 40 GbE data-plane (KR4 “fat pipes”) • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA (ZU7EG) for enhanced security

The R10s is a reconnaissance and surveillance drone capable of conducting up to two hours of mission flight, transmitting real-time information such as target location and scale to the ground control system. Based on the company’s innovative vertical take-off and landing (VTOL) platform “Bluebird,” the R10s is equipped with EO/IR optical sensors and a laser range finder for advanced target detection. Upon receiving mission orders, the R10s takes off vertically, transitions to fixed-wing flight, and proceeds to the designated area. Its onboard cameras and sensors identify and track targets, relaying precise coordinates to the ground control system. With modular wing replacement, the R10s can be configured for extended endurance of around two hours or for high-speed maneuverability, ensuring optimal adaptability and mission effectiveness across diverse operational scenarios.

1. Integrated Production System Equipped with in-house CF-SMC compression molding equipment, we provide a complete one-stop solution—from sheet production to final composite molding—tailored to customer requirements. This ensures both exceptional quality and production efficiency. In line with ESG management, we also utilize our proprietary recycled carbon fiber technology to recycle CFRP waste generated during CF-SMC production. 2. Moldability & Productivity ILSUNG’s carbon fiber SMC technology offers superior moldability compared to conventional continuous CFRP and aluminum. With a rapid curing speed of about 1 minute per 1 mm thickness, it enables high-speed, mass production. Complex and precise geometries can be molded reliably, delivering strong competitiveness for both simple and highly engineered components. 3. Exceptional Lightweight Performance CF-SMC has a lower density than aluminum castings while maintaining high mechanical strength, delivering the optimal lightweight solution for industries where weight reduction is critical. 4. Balanced Performance This technology not only achieves lightweight properties but also ensures a well-balanced combination of mechanical strength, corrosion resistance, dimensional stability, and durability. It maintains stable performance under extreme environments and repeated loads, making it highly suitable for automotive, aerospace, and defense applications where reliability is critical. 5. Cost Competitiveness Compared to CFRP, it provides a lower-cost structure and high-speed molding capability, ensuring excellent price competitiveness. This significantly improves cost efficiency in industries that demand large-scale production—such as automotive, aerospace, and defense—and strengthens its growth potential within the composites market.

Shock Tech designs, develops, manufactures and tests shock attenuation and vibration isolation systems for the most demanding environments. Customized solutions are provided with application requirements analyzation. Low Profile & Avionics Mounts are a series of all attitude, mid to high frequency, low profile mounts, used in a variety of applications including airborne avionics, etc. Bushing Mounts are a series of all attitude, low cost mounts, protecting against both vibration and shock, used in a variety of applications including airborne avionics, etc.