A lightweight high tensile aluminium frame, suspended by elastomeric anti-vibration mounts, provides superior ‘sway-space’ between the frame and the outer container and is the best possible way to safeguard delicate equipmentMore robust and stainless steel variants are custom-made for heavy payloads and corrosive environments. Enhanced ‘sway space’ between inner frame and outer case to prevent contact with outer container All our 19 inch Amazon Racks have a ‘user adjustable’ inner frame allowing back to front movement of 50mm within the outer container to accommodate front panel and rear wiring/ connector needs. Optional ‘EasyGlide’ removable, self anchoring, internal frame system Standard, stainless steel M6 threaded fasteners secure electronic equipment into floating stainless steel cage nuts at both front and rear of frame. All our 19 inch Amazon Racks have positive stacking, aligning at the front face regardless of rack depth

Product Information Frequency signal generator for small target detection High-frequency resolution design and frequency conversion function using DDS method main performance Frequency: Ku-Band ~ Ka-Band Very Small Size, Pulse Mode Output Level: -5dBm min Spurious: -30dBc min Harmonic: -40dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 50dBc Min Applicable fields Applicable to ultra-small guided weapon tower system and small radar system

• Openable sleeves • Expandable sleeves • Convoluted conduits • Heat shrink tubing & sleeves • Heats shrink boots • Specific sleeves

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

Haigh-Farr specializes in the design, manufacture, and testing (electrical and environmental) of conformal and non-conformal antennas. As a leader in the aerospace industry, our antennas are found on the latest high-performance airborne and space vehicles. Haigh-Farr is well known for its reliable, high-quality range of customizable and off-the-shelf solutions.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

The DRU-H-R has growth capacity to add an embedded Selective Availability Anti-Spoofing Module (SAASM) GPS with M-code capability. It can also be configured to function in unmanned, rotational and shipboard environments. The DRU-H-R is an advanced precision navigation system that provides accurate vehicle position and attitude data. This unit replaced the DRU-H on Paladin and Firefinder, both playing critical roles in supporting U.S. ground forces in all phases of active combat operations. The EMCORE DRU-H-R design upgraded system performance by using high accuracy, combat-proven inertial sensors currently fielded on the Multiple Launch Rocket System (MLRS), High-Mobility Artillery Rocket System (HIMARS), and Improved Position and Azimuth Determining System (IPADS). The DRU-H-R delivers precisely what the Army of tomorrow needs — a sustainable, affordable system designed to remain operationally effective well into the future.