This is the UAV launchers capable of launching the fixed-wing UAVs even on mountainous terrain, field, ships without sufficient runways to take off. It is designed to be the most powerful and easy to operate to take off the fixed-wing type UAVs of various specifications(Take-off weight, Take-off speed, and allowable G-force) into the air. It provides an interface that standardizes the shuttle for any type of unmanned aviation vehicle, and is easy to mount and to avoid take-off interference. A specially designed and manufactured hydraulic actuator is used to fully cope with the take-off weight of the aircraft, and a proprietary accumulator to allow a wide range of launch speed control. And multiple pulleys are equipped to ensure acceleration performance.

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

BERNIER designed the CMA-USBC line specially for equipment in harsh environments. The CMA-USBC connectors are Push-Pull military connectors that offer many possibilities of electronic integration as : USB Memory key, Authentification key, Wireless module, Crypto and Shunt module…

The EL2000 is an LTE femtocell developed for indoor use, providing seamless LTE service in environments such as homes or offices.

Toxic gases, such as Silane (SiH4), Nitrogen Trifluoride (NF3), Sulphur Hexafluoride (SF6), Ammonia (NH3), Nitrous Oxide (N2O), etc. must be contained in IMDG certified MEGC tubes for ocean transportation. For high purity gases such as SiH₄, and NF₃, DS Aether CT provides internal-polished tubes to a grade of 3S, 25S, etc. depending on customer's requirements. DS Aether CT’s tubes keep moisture levels below 1 ppm or 3 ppm by a heated vacuuming process so that gas quality can be maintained at high purity level.

The SDT F 16 Combat Training Pod is mounted on F-16 and similar air platforms in an external pod, and ensures efficiency in exercises and in the provision of air-to-air and air-to-ground tactics training to pilots. SDT F - 16 Combat Training Pod features advanced air-to-air and air-to-ground combat training capabilities, such as real-time autonomous position generation, weapon simulation and real-time hit/miss notification, thanks to its long-range and high-speed RF data link and integrated processors. The system has mission planning, live monitoring, debriefing and analysis/evaluation features. The SDT F 16 Combat Training Pod enables training in real flight conditions and in multi-threat/target environments. Its high-speed data link and modular design mean that the System is also a Live-Virtual-Constructive (LVC) training infrastructure.

Phase shifter for Electrically Scanned Array Antenna