It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

Lumir, in collaboration with the Electronics and Telecommunications Research Institute (ETRI), developed and integrated this device for lunar exploration aboard Danuri (KPLO, the Korea Pathfinder Lunar Orbiter), Korea's first lunar probe. This device successfully demonstrated its performance by receiving BTS music videos transmitted from the Moon to Earth, achieving Technology Readiness Level (TRL) 9.

Signaty X IR Helmet Strobe is a next‑generation, domestically developed IFF LED device. It features IR plus RGBW color LEDs (red, green, blue, white), all housed under a high‑strength polycarbonate dome. It supports multi‑wireless synchronization via short‑range communication, GPS/RTC, and mesh relay—enabling simultaneous use of RGB LED + IR or RGB LED + white LED, with up to 42 pattern synchronizations (expandable to 252) using 256‑bit encrypted data. Runtime reaches up to 130 hours (LED 130 h / IR 125 h) on a single AA battery. Built to MIL‑STD‑810G and KC standards, it ensures drop, dust, sand, immersion, and temperature resistance. Manufactured in Korea with domestic service support.

Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

The SWE450S is a rugged 3U VPX fully managed Layer-2/3 Ethernet switch aligned with the compute-intensive SOSA profile, delivering high-performance 25/100 GbE switching and flexible I/O reconfiguration. • High-performance 2 Tbps switch fabric with wire-speed throughput • Front: up to 2x 100 GBASE-SR4 (MPO); Rear: 25/100 GbE KR4, 100/1000 BASE-T, USB-C, RS-232Reconfigurable fat-pipe to thin-pipe ports, speed downgrading capability • Dual-core ARM + OpenWare™ management, sanitization support • SOSA-aligned (SLT3), rugged air- & conduction-cooled options

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.

Integrated Soldier Power / Data Hubs are Personal Area Network (PAN) hub and interconnect systems providing network data access, peripheral connectivity and smart battery power management for dismounted soldier C4ISR electronics in Digitally Aided Close Air Support (DACAS) missions, including precision targeting, tactical radio communications, real-time video downlink, night vision technologies, GPS/navigation, blue force tracking, personal computing and smart phone integration.

ELECTROMECHANICAL RELAYS