Phased Array Multi Function Antenna including Radome

Powered by a single CR123 lithium battery, the ACTUS® ALD-1 Laser Sight offers 4 to 9 hours of runtime, depending on usage. Its robust all-aluminum housing ensures exceptional durability, while its compact size, similar to a standard deck of playing cards, makes it highly portable and convenient. The IR and visible lasers are optically paired, streamlining the zeroing process for quick, accurate adjustments and enhanced ease of use.

DS Aether CT provides various industrial Gas Tube Trailers such as Helium (He), Hydrogen (H2), Neon (Ne), Nitrogen (N2) and Argon (Ar), as well as CNG. The working pressure is set to national requirements or customer's demands such as 166 bar, 200 bar, or 250 bar. The color of the jumbo tubes and skid frames follows ISO color codes, or the designations of customers.

The entire furniture set is AK compatible and thus the weapon can be fully configured to fit and use a wide array of accessories, making it suited for any preferences and all tasks.

The KF-21 is the project which aims to replae the aged fighters in operation, F-4, and F-5 of the Republic of Korea Air Force and develop the indigenous Korean fighter aircraft which is equipped with performances suitable for the future battlefield of the country's air force. Korea's largest-scaled KF-21 project is the national R&D project with a development span of 10 years and 6 months and is driven with Indonesia under international joint development. Based on its development experience and infrastructure of a homegrown airplane, such as the KT-1 basic trainer, T-50 Advanced Jet Trainer, TA-50 Lead-in-Fighter-Trainer, and FA-50 Light Combat Aircraft, KAI is under development of the KF-21 project successfully. Through this project, KAI plans to develop the aerospace technology of Korea and contribute to national peace and security as well as economic development.

Key Features Revolutionary speed enabled by advanced LFD technology High-resolution and highly accurate prints Compatible with a wide range of resins including functional and engineering materials Dimensions: 390 × 367 × 554 mm Build Volume: 200 × 125 × 210 mm Weight: 18.3 kg Specifications XY Resolution: 25μm Minimum Layer Thickness: 25μm Maximum Print Speed: 100 mm/hr

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The S10s, the first model of the PabloM series, is a loitering munition designed for strike missions. Leveraging mesh communication and AI-enabled swarm flight, it can execute both simultaneous and sequential self-destructive strikes against targets, effectively neutralizing diverse “anti-drone” systems. The S10s launches autonomously from a dedicated platform and can sustain flight for over 30 minutes, enabling wide-area operational coverage. When engaging a target, it performs a steep dive of up to 45 degrees at speeds reaching 150 km/h, ensuring rapid and precise impact. Built from lightweight foam-board materials, the S10s is optimized for fast, large-scale production during operations. Furthermore, its modular open-architecture design, aligned with the K-MOSA concept, allows mission payloads to be quickly swapped and integrated, delivering exceptional flexibility and interoperability in real combat environments.