Localization development in progress for general components of Tank

r-TWR are digital towers which enable the remote use of air traffic services (ATS) from any location. Being at an airport, air base or at a centralised location, distance is no longer a factor. The r-TWR functions can be integrated to a traditional tower as a hybrid solution, and can support the ramp and apron management using the same information. It can also be deployed and put in place when needed. Through the use of digital camera technology and sensors, operators can effectively conduct and manage various services remotely, based on visual surveillance. This removes the need to be on-site and occupying critical space at an airport, in favour of a chosen location.

The new TAC-450-320/340/360 inertial measurement unit (IMU) is a dependable, tactical-grade, non-ITAR inertial system that’s also affordable. It features EMCORE’s exclusive photonic integrated chip (PIC) technology for robust performance and survivability and offers inertial-grade MEMS accelerometers for outstanding FOG-based inertial performance as affordable as MEMS alternatives. The TAC-450-320/340/360 IMU is ideal for autonomous and unmanned commercial and defense applications, mobile mapping and surveying systems, targeting and pointing systems, and guidance and positioning. Highlights Compact and lightweight with high-performance Offered with 16g inertial-grade MEMS accelerometer Robust performance with high bandwidth Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-320/340/360 IMU provides the safe, accurate performance autonomous platforms demand. State-of-the-art Electronics EMCORE’s Dual Core DSP electronics with ARM processor require less power for extended product life and offer higher speed with integrated multi-channel processing. Low-loss optical circuits use less light for greater efficiency. Feature Options Developer’s Kit for Rapid Integration The FOG/IMU Developer’s Kit includes easy-to-use software that accelerates your IMU and FOG integration, development, and interface efforts.

Explore nanoscale structure with clarity, speed, and confidence. Tescan’s STEM solutions are purpose-built for advanced materials research, semiconductor analysis, and detailed nanoscale characterization. With integrated 4D-STEM, precession-assisted diffraction, and synchronized EDS workflows, our instruments deliver actionable insight with unmatched usability—whether you're mapping strain, analyzing phases, or accelerating failure analysis and R&D.

High impedance D-Sub connectors are designed to ground the outer shield of a twinax or quadrax contact directly to the shell of the connector. A multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is an extremely low contact resistance when measured from the contact outer body to the connector flange, ensuring minimal RF noise and high durability of over 500 mating cycles.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

Giraffe 1X is an ideal air surveillance component in the Ground Based Air Defence (GBAD) domain that provides ground based air defence commanders with engagement quality target data, drone detection and Counter-Artillery, Rocket and Mortar (C-RAM) sense and warn within a single solution. It is the ideal main sensor for a Very Short Range Radar (VSHORAD) system and can be used as a gap filler that complements larger GBAD systems, or as a Counter-UAS (C-UAS) solution.

MOHOC® 2 builds on the success of the original MOHOC Camera with enhanced performance, improved usability, and modernised tactical integration. Purpose-built for defence, law enforcement, and emergency response professionals, the MOHOC 2 retains the patented helmet-contoured design and snag-free profile while introducing upgraded imaging, improved low-light sensitivity, and extended networking capabilities. Designed to perform in the harshest operational conditions, MOHOC 2 is IP68-rated, MIL-STD-810 tested, and capable of surviving 10 m submersion and 2 m drops. It delivers Full HD video at 60 FPS, high-resolution stills, and supports long-duration recording through external power sources. The camera operates silently with no flash or shutter sound, and offers multiple mounting options for helmets, MOLLE, and rail systems. With support for Wi-Fi control, stealth recording, and infrared capability in the IR model, MOHOC 2 is a mission-ready video solution built for today’s connected battlefield.