- Minimizing the station's door opening and closing time to support drones' quick entry and exit. - Structural design to minimize noise and vibration when opening and closing the door - Design and implementation of an interface for interaction between an automatic door system and a drone. - Automatically opening and closing door system - Automatic detection of drones through cameras and sensors, and safe storage and charging functions

Our PIT systems are built to withstand the toughest weather conditions and meet international aviation standards. Our versatile configurations are tailored to your operational needs - from compact access units to advanced pop-up mechanisms. PIT system types: MINIPIT Hatch Systems – Compact and simple underground solution for smaller aprons or light traffic zones. Standard Hatch PIT Systems – Durable and reliable access pits for electrical, fuel, and IT systems under the apron. Pop-Up PIT Systems – Mechanized lifting PIT system for convenient and fast surface access when needed. Each system offers specific advantages depending on the scale, type of aircraft, and regional standards of your operations.

Safran’s TG600 is a 600 kW hybrid-electric turbogenerator—derived from the Arrano turboshaft and paired with GENeUS generators—designed to serve as the core propulsion component for Electra’s nine‑passenger eSTOL aircraft.

Low Size, Weight and Power (SWaP) at only 297g. Up to 100 TOPS GPU by NVIDIA® Jetson Orin™ NX Supports multiple camera and sensor interfaces 2x GbE and 2x USB3 for RGB/ Infrared/ hyperspectral cameras and lidar/ radar 2x GMSL2 for HDR/ 3D cameras Built-in UART and CAN to interact with flight controller 1x M.2 2230 for storage and 4G/5G communication ready Supports 4S-14S drone battery pack Compatible GMSL2 cameras with pre-built drivers

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Confronting climate change, designing quieter and more efficient airplanes, developing innovative satellites to observe the Earth's system: our sector is using its skills to their utmost to take action for the environment. Our two main objectives are to advance our technologies so that we can better observe our planet and to create sustainable air travel.

Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

Patrol Killer Guided Electro Optic Target System